Répondre

Veuillez composer votre message et l'envoyer
Options
Si vous êtes un être humain ne changez pas le contenu de ces deux champs.

Retour

Résumé de la discussion (messages les plus récents en premier)

manu_972
25/12/2010 17:50:44

Ben en fait c'est là le problème, j'ai juste tout refait à tête reposée et ça a marché. Les seuls vrais trucs que j'ai pu observer:
-le support du lecteur de carte directement par sasc n'est pas au top (fichier cardslot.conf)
-la version de newcs qui (me) va bien: 1.65, la 1.66 ne semblait pas marcher (mais là aussi le problème était peut-être entre la chaise et le clavier ;-).
Il me reste à voir si je peux utiliser cette solution pour voir les châines HD (d'autant plus qu'elles sont toutes sur le même multiplex ici, donc je pourrais toutes les enregistrer en même temps!).

gilles74
25/12/2010 17:19:26

content de savoir que ça fonctionne mais tu pourrais nous dire ce que tu as fait pour résoudre ton problème.

C'est ça aussi le partage wink

manu_972
25/12/2010 15:52:49

Juste un dernier post pour dire que tout est résolu d'après les derniers tests que j'ai enfin pu effectué. Merci à tous!

manu_972
21/11/2010 00:05:59

Désolé encore un autre bout du log qui m'avait échappé (plutôt au début):

Nov 20 18:54:24.087 CSA: Removing csa for rb: 1
Orbit: 00003255E
Nov 20 18:54:24.628 CSA: Removing csa for rb: 1
Nov 20 18:54:24.983 CHANNEL: Already seen sid: 9075
Nov 20 18:54:25.838 CAM(core.pids): 0: now tuned to source 8cb7(S120.7E) transponder 33895
Nov 20 18:54:25.838 CAM: SC completed  Tune cmd
Nov 20 18:54:25.838 CAM: Adding pid 162 for sid 9062 to pidlist
Nov 20 18:54:25.838 CAM: Adding pid 88 for sid 9062 to pidlist
Nov 20 18:54:25.838 CAM: Adding pid 218 for sid 9062 to pidlist
Nov 20 18:54:25.838 CAM: Adding pid 281 for sid 9062 to pidlist
Nov 20 18:54:25.838 CAM: Adding pid 1250 for sid 9062 to pidlist
Nov 20 18:54:25.838 CAM: Adding pid 339 for sid 9062 to pidlist
Nov 20 18:54:25.838 CAM: Adding pid 1251 for sid 9062 to pidlist
Nov 20 18:54:25.838 CAM: Adding pid 207 for sid 9062 to pidlist
Nov 20 18:54:25.838 CAM: Adding pid 206 for sid 9062 to pidlist
Nov 20 18:54:25.838 CAM(core.pids): 0: update SID 9062 (zero=0 noshift=0)
Nov 20 18:54:25.838 CAM(core.pids): 0: pids typ5=00a2 typ5=0058 typ5=00da typ5=0119 typ5=04e2 typ5=0153 typ5=04e3 typ5=00cf typ5=00ce
Nov 20 18:54:25.838 CAM(core.pids): SimplyCa entry pidCa=0
Nov 20 18:54:25.838 CAM(core.pids): prgca: 09 11 01 00 E5 F0 00 9F FF 00 00 00 00 00 18 7C C0 00 21 09 11 01 00 F1 A8 00 9F FF 00 00 00 00 00 18 7C C0 29 74 09 11 01 00 E5 F0 00 9F FF 00 00 00 00 00 18 7C C0 00 21 09 11 01 00 F1 A8 00 9F FF 00 00 00 00 00 18 7C C0 29 74 09 11 01 00 E7 08 00 9F FF 00 02 00 00 00 00 00 00 20 75 09 11 01 00 F6 A8 00 9F FF 00 02 00 00 00 00 00 00 20 75
Nov 20 18:54:25.838 CAM(core.pids): pidca 00a2: <empty>
Nov 20 18:54:25.838 CAM(core.pids): pidca 0058: <empty>
Nov 20 18:54:25.838 CAM(core.pids): pidca 00da: <empty>
Nov 20 18:54:25.838 CAM(core.pids): pidca 0119: <empty>
Nov 20 18:54:25.838 CAM(core.pids): pidca 04e2: <empty>
Nov 20 18:54:25.838 CAM(core.pids): pidca 0153: <empty>
Nov 20 18:54:25.838 CAM(core.pids): pidca 04e3: <empty>
Nov 20 18:54:25.838 CAM(core.pids): pidca 00cf: <empty>
Nov 20 18:54:25.838 CAM(core.pids): pidca 00ce: <empty>
Nov 20 18:54:25.838 CAM(core.pids): SimplyCa exit pidCa=0
Nov 20 18:54:25.838 CAM(core.pids): prgca: 09 11 01 00 E5 F0 00 9F FF 00 00 00 00 00 18 7C C0 00 21 09 11 01 00 F1 A8 00 9F FF 00 00 00 00 00 18 7C C0 29 74 09 11 01 00 E5 F0 00 9F FF 00 00 00 00 00 18 7C C0 00 21 09 11 01 00 F1 A8 00 9F FF 00 00 00 00 00 18 7C C0 29 74 09 11 01 00 E7 08 00 9F FF 00 02 00 00 00 00 00 00 20 75 09 11 01 00 F6 A8 00 9F FF 00 02 00 00 00 00 00 00 20 75
Nov 20 18:54:25.838 CAM(core.pids): pidca 00a2: <empty>
Nov 20 18:54:25.838 CAM(core.pids): pidca 0058: <empty>
Nov 20 18:54:25.839 CAM(core.pids): pidca 00da: <empty>
Nov 20 18:54:25.839 CAM(core.pids): pidca 0119: <empty>
Nov 20 18:54:25.839 CAM(core.pids): pidca 04e2: <empty>
Nov 20 18:54:25.839 CAM(core.pids): pidca 0153: <empty>
Nov 20 18:54:25.839 CAM(core.pids): pidca 04e3: <empty>
Nov 20 18:54:25.839 CAM(core.pids): pidca 00cf: <empty>
Nov 20 18:54:25.839 CAM(core.pids): pidca 00ce: <empty>
Nov 20 18:54:25.839 CAM(core.pids): 0: SID=9062 zero=0 | sid=-/-/- zero=-/-/- idle=-/-/-
Nov 20 18:54:25.839 CAM(core.pids): 0: found handler for SID 9062 (0.1 idle=1 idx=1)
Nov 20 18:54:25.839 CAM(core.ecm): 0.1: setting new SID 9062
Nov 20 18:54:25.839 CAM(core.pids): 0.1: pids on entry
Nov 20 18:54:25.839 CAM(core.pids): 0.1: pids after delete
Nov 20 18:54:25.839 CAM(core.pids): 0: descrambling pid 00a2 on index 1
Called cSascDvbDevice::SetCaPid
Nov 20 18:54:25.839 CAM: Sending (1) key P 1 PID: 162
Nov 20 18:54:25.839 CSA: Got command(1): P idx: 1 pid: 162
Nov 20 18:54:25.839 CAM(core.pids): 0: descrambling pid 0058 on index 1
Called cSascDvbDevice::SetCaPid
Nov 20 18:54:25.839 CAM: Sending (1) key P 1 PID: 88
Nov 20 18:54:25.839 CSA: Got command(1): P idx: 1 pid: 88
Nov 20 18:54:25.839 CAM(core.pids): 0: descrambling pid 00da on index 1
Called cSascDvbDevice::SetCaPid
Nov 20 18:54:25.839 CAM: Sending (1) key P 1 PID: 218
Nov 20 18:54:25.839 CSA: Got command(1): P idx: 1 pid: 218
Nov 20 18:54:25.839 CAM(core.pids): 0: descrambling pid 0119 on index 1
Called cSascDvbDevice::SetCaPid
Nov 20 18:54:25.839 CAM: Sending (1) key P 1 PID: 281
Nov 20 18:54:25.839 CSA: Got command(1): P idx: 1 pid: 281
Nov 20 18:54:25.839 CAM(core.pids): 0: descrambling pid 04e2 on index 1
Called cSascDvbDevice::SetCaPid
Nov 20 18:54:25.839 CAM: Sending (1) key P 1 PID: 1250
Nov 20 18:54:25.839 CSA: Got command(1): P idx: 1 pid: 1250
Nov 20 18:54:25.839 CAM(core.pids): 0: descrambling pid 0153 on index 1
Called cSascDvbDevice::SetCaPid
Nov 20 18:54:25.839 CAM: Sending (1) key P 1 PID: 339
Nov 20 18:54:25.839 CSA: Got command(1): P idx: 1 pid: 339
Nov 20 18:54:25.839 CAM(core.pids): 0: descrambling pid 04e3 on index 1
Called cSascDvbDevice::SetCaPid
Nov 20 18:54:25.839 CAM: Sending (1) key P 1 PID: 1251
Nov 20 18:54:25.839 CSA: Got command(1): P idx: 1 pid: 1251
Nov 20 18:54:25.839 CAM(core.pids): 0: descrambling pid 00cf on index 1
Called cSascDvbDevice::SetCaPid
Nov 20 18:54:25.839 CAM: Sending (1) key P 1 PID: 207
Nov 20 18:54:25.839 CSA: Got command(1): P idx: 1 pid: 207
Nov 20 18:54:25.839 CAM(core.pids): 0: descrambling pid 00ce on index 1
Called cSascDvbDevice::SetCaPid
Nov 20 18:54:25.839 CAM: Sending (1) key P 1 PID: 206
Nov 20 18:54:25.839 CSA: Got command(1): P idx: 1 pid: 206
Nov 20 18:54:25.839 CAM(core.pids): 0.1: pids after add typ5=00a2 typ5=0058 typ5=00da typ5=0119 typ5=04e2 typ5=0153 typ5=04e3 typ5=00cf typ5=00ce
Nov 20 18:54:25.839 CAM(core.ecm): 0.1: is no longer idle
Nov 20 18:54:25.839 MSG: Got unprocessed message type: 1
Nov 20 18:54:25.839 MSG: Got unprocessed message type: 1
Nov 20 18:54:25.839 MSG: Got unprocessed message type: 1
Nov 20 18:54:25.839 MSG: Got unprocessed message type: 1
Nov 20 18:54:25.839 MSG: Got unprocessed message type: 1
Nov 20 18:54:25.840 MSG: Got unprocessed message type: 1
Nov 20 18:54:25.840 CAM: Adding pid 169 for sid 9069 to pidlist
Nov 20 18:54:25.840 CAM: Adding pid 116 for sid 9069 to pidlist
Nov 20 18:54:25.840 CAM: Adding pid 53 for sid 9069 to pidlist
Nov 20 18:54:25.840 CAM: Adding pid 218 for sid 9069 to pidlist
Nov 20 18:54:25.840 CAM: Adding pid 281 for sid 9069 to pidlist
Nov 20 18:54:25.840 CAM: Adding pid 1250 for sid 9069 to pidlist
Nov 20 18:54:25.840 CAM: Adding pid 339 for sid 9069 to pidlist
Nov 20 18:54:25.840 CAM: Adding pid 1251 for sid 9069 to pidlist
Nov 20 18:54:25.840 CAM: Adding pid 207 for sid 9069 to pidlist
Nov 20 18:54:25.840 CAM: Adding pid 206 for sid 9069 to pidlist
Nov 20 18:54:25.840 CAM(core.pids): 0: update SID 9069 (zero=0 noshift=0)
Nov 20 18:54:25.840 CAM(core.pids): 0: pids typ5=00a9 typ5=0074 typ5=0035 typ5=00da typ5=0119 typ5=04e2 typ5=0153 typ5=04e3 typ5=00cf typ5=00ce
Nov 20 18:54:25.840 CAM(core.pids): SimplyCa entry pidCa=0
Nov 20 18:54:25.840 CAM(core.pids): prgca: 09 11 01 00 E7 08 00 9F FF 00 02 00 00 00 00 00 00 20 75 09 11 01 00 F6 A8 00 9F FF 00 02 00 00 00 00 00 00 20 75
Nov 20 18:54:25.840 CAM(core.pids): pidca 00a9: <empty>
Nov 20 18:54:25.840 CAM(core.pids): pidca 0074: <empty>
Nov 20 18:54:25.840 CAM(core.pids): pidca 0035: <empty>
Nov 20 18:54:25.840 CAM(core.pids): pidca 00da: <empty>
Nov 20 18:54:25.840 CAM(core.pids): pidca 0119: <empty>
Nov 20 18:54:25.840 CAM(core.pids): pidca 04e2: <empty>
Nov 20 18:54:25.840 CAM(core.pids): pidca 0153: <empty>
Nov 20 18:54:25.840 CAM(core.pids): pidca 04e3: <empty>
Nov 20 18:54:25.840 CAM(core.pids): pidca 00cf: <empty>
Nov 20 18:54:25.840 CAM(core.pids): pidca 00ce: <empty>
Nov 20 18:54:25.840 CAM(core.pids): SimplyCa exit pidCa=0
Nov 20 18:54:25.840 CAM(core.pids): prgca: 09 11 01 00 E7 08 00 9F FF 00 02 00 00 00 00 00 00 20 75 09 11 01 00 F6 A8 00 9F FF 00 02 00 00 00 00 00 00 20 75
Nov 20 18:54:25.840 CAM(core.pids): pidca 00a9: <empty>
Nov 20 18:54:25.840 CAM(core.pids): pidca 0074: <empty>
Nov 20 18:54:25.840 CAM(core.pids): pidca 0035: <empty>
Nov 20 18:54:25.840 CAM(core.pids): pidca 00da: <empty>
Nov 20 18:54:25.840 CAM(core.pids): pidca 0119: <empty>
Nov 20 18:54:25.840 CAM(core.pids): pidca 04e2: <empty>
Nov 20 18:54:25.840 CAM(core.pids): pidca 0153: <empty>
Nov 20 18:54:25.840 CAM(core.pids): pidca 04e3: <empty>
Nov 20 18:54:25.840 CAM(core.pids): pidca 00cf: <empty>
Nov 20 18:54:25.840 CAM(core.pids): pidca 00ce: <empty>
Nov 20 18:54:25.840 CAM(core.pids): 0: SID=9069 zero=0 | sid=-/-/- zero=-/-/- idle=-/-/-
Nov 20 18:54:25.840 CAM(core.pids): 0: found handler for SID 9069 (0.2 idle=1 idx=2)
Nov 20 18:54:25.840 CAM(core.ecm): 0.2: setting new SID 9069
Nov 20 18:54:25.840 CAM(core.pids): 0.2: pids on entry
Nov 20 18:54:25.840 CAM(core.pids): 0.2: pids after delete
Nov 20 18:54:25.840 CAM(core.pids): 0: descrambling pid 00a9 on index 2
Called cSascDvbDevice::SetCaPid
Nov 20 18:54:25.840 CAM: Sending (1) key P 2 PID: 169
Nov 20 18:54:25.840 CSA: Got command(1): P idx: 2 pid: 169
Nov 20 18:54:25.840 CAM(core.pids): 0: descrambling pid 0074 on index 2
Called cSascDvbDevice::SetCaPid
Nov 20 18:54:25.840 CAM: Sending (1) key P 2 PID: 116
Nov 20 18:54:25.841 CSA: Got command(1): P idx: 2 pid: 116
Nov 20 18:54:25.841 CAM(core.pids): 0: descrambling pid 0035 on index 2
Called cSascDvbDevice::SetCaPid
Nov 20 18:54:25.841 CAM: Sending (1) key P 2 PID: 53
Nov 20 18:54:25.841 CSA: Got command(1): P idx: 2 pid: 53
Nov 20 18:54:25.841 CAM(core.pids): 0: descrambling pid 00da on index 2
Called cSascDvbDevice::SetCaPid
Nov 20 18:54:25.841 CAM: Sending (1) key P 2 PID: 218
Nov 20 18:54:25.841 CSA: Got command(1): P idx: 2 pid: 218
Nov 20 18:54:25.841 CAM(core.pids): 0: descrambling pid 0119 on index 2
Called cSascDvbDevice::SetCaPid
Nov 20 18:54:25.841 CAM: Sending (1) key P 2 PID: 281
Nov 20 18:54:25.841 CSA: Got command(1): P idx: 2 pid: 281
Nov 20 18:54:25.841 CAM(core.pids): 0: descrambling pid 04e2 on index 2
Called cSascDvbDevice::SetCaPid
Nov 20 18:54:25.841 CAM: Sending (1) key P 2 PID: 1250
Nov 20 18:54:25.841 CSA: Got command(1): P idx: 2 pid: 1250
Nov 20 18:54:25.841 CAM(core.pids): 0: descrambling pid 0153 on index 2
Called cSascDvbDevice::SetCaPid
Nov 20 18:54:25.841 CAM: Sending (1) key P 2 PID: 339
Nov 20 18:54:25.841 CSA: Got command(1): P idx: 2 pid: 339
Nov 20 18:54:25.841 CAM(core.pids): 0: descrambling pid 04e3 on index 2
Called cSascDvbDevice::SetCaPid
Nov 20 18:54:25.841 CAM: Sending (1) key P 2 PID: 1251
Nov 20 18:54:25.841 CSA: Got command(1): P idx: 2 pid: 1251
Nov 20 18:54:25.841 CAM(core.pids): 0: descrambling pid 00cf on index 2
Called cSascDvbDevice::SetCaPid
Nov 20 18:54:25.841 CAM: Sending (1) key P 2 PID: 207
Nov 20 18:54:25.841 CSA: Got command(1): P idx: 2 pid: 207
Nov 20 18:54:25.841 CAM(core.pids): 0: descrambling pid 00ce on index 2
Called cSascDvbDevice::SetCaPid
Nov 20 18:54:25.841 CAM: Sending (1) key P 2 PID: 206
Nov 20 18:54:25.841 CSA: Got command(1): P idx: 2 pid: 206
Nov 20 18:54:25.841 CAM(core.pids): 0.2: pids after add typ5=00a9 typ5=0074 typ5=0035 typ5=00da typ5=0119 typ5=04e2 typ5=0153 typ5=04e3 typ5=00cf typ5=00ce
Nov 20 18:54:25.841 CAM(core.ecm): 0.2: is no longer idle
Nov 20 18:54:25.841 MSG: Got unprocessed message type: 1
Nov 20 18:54:25.841 MSG: Got unprocessed message type: 1
Nov 20 18:54:25.900 CAM(core.ecm): 0.1: triggered SID -1/9062 idx -1/1 mode -1/0 -
Nov 20 18:54:25.900 CAM(core.ecm): 0.1: new caDescr: 09 11 01 00 E5 F0 00 9F FF 00 00 00 00 00 18 7C C0 00 21 09 11 01 00 F1 A8 00 9F FF 00 00 00 00 00 18 7C C0 29 74 09 11 01 00 E5 F0 00 9F FF 00 00 00 00 00 18 7C C0 00 21 09 11 01 00 F1 A8 00 9F FF 00 00 00 00 00 18 7C C0 29 74 09 11 01 00 E7 08 00 9F FF 00 02 00 00 00 00 00 00 20 75 09 11 01 00 F6 A8 00 9F FF 00 02 00 00 00 00 00 00 20 75
Nov 20 18:54:25.900 CAM(core.ecm): 0.1: CA descriptors for SID 9062 (len=114)
Nov 20 18:54:25.900 CAM(core.ecm): 0.1: descriptor 01 00 e5 f0 00 9f ff 00 00 00 00 00 18 7c c0 00 21
Nov 20 18:54:25.900 CAM(core.ecm): 0.1: found 0100(0000) (SC-Seca) id 009f with ecm 5f0/80 (new)
Nov 20 18:54:25.900 CAM(core.ecm): 0.1: descriptor 01 00 f1 a8 00 9f ff 00 00 00 00 00 18 7c c0 29 74
Nov 20 18:54:25.900 CAM(core.ecm): 0.1: found 0100(0000) (SC-Seca) id 009f with ecm 11a8/80 (new)
Nov 20 18:54:25.900 CAM(core.ecm): 0.1: descriptor 01 00 e5 f0 00 9f ff 00 00 00 00 00 18 7c c0 00 21
Nov 20 18:54:25.900 CAM(core.ecm): 0.1: found 0100(0000) (SC-Seca) id 009f with ecm 5f0/80 (already present)
Nov 20 18:54:25.900 CAM(core.ecm): 0.1: descriptor 01 00 f1 a8 00 9f ff 00 00 00 00 00 18 7c c0 29 74
Nov 20 18:54:25.900 CAM(core.ecm): 0.1: found 0100(0000) (SC-Seca) id 009f with ecm 11a8/80 (already present)
Nov 20 18:54:25.900 CAM(core.ecm): 0.1: descriptor 01 00 e7 08 00 9f ff 00 02 00 00 00 00 00 00 20 75
Nov 20 18:54:25.900 CAM(core.ecm): 0.1: found 0100(0000) (SC-Seca) id 009f with ecm 708/80 (new)
Nov 20 18:54:25.901 CAM(core.ecm): 0.1: descriptor 01 00 f6 a8 00 9f ff 00 02 00 00 00 00 00 00 20 75
Nov 20 18:54:25.901 CAM(core.ecm): 0.1: found 0100(0000) (SC-Seca) id 009f with ecm 16a8/80 (new)
Nov 20 18:54:25.901 CAM(core.ecm): 0.2: triggered SID -1/9069 idx -1/2 mode -1/0 -
Nov 20 18:54:25.901 CAM(core.ecm): 0.2: new caDescr: 09 11 01 00 E7 08 00 9F FF 00 02 00 00 00 00 00 00 20 75 09 11 01 00 F6 A8 00 9F FF 00 02 00 00 00 00 00 00 20 75
Nov 20 18:54:25.901 CAM(core.ecm): 0.2: CA descriptors for SID 9069 (len=38)
Nov 20 18:54:25.901 CAM(core.ecm): 0.2: descriptor 01 00 e7 08 00 9f ff 00 02 00 00 00 00 00 00 20 75
Nov 20 18:54:25.901 CAM(core.ecm): 0.2: found 0100(0000) (SC-Seca) id 009f with ecm 708/80 (new)
Nov 20 18:54:25.901 CAM(core.ecm): 0.2: descriptor 01 00 f6 a8 00 9f ff 00 02 00 00 00 00 00 00 20 75
Nov 20 18:54:25.902 CAM(core.ecm): 0.2: found 0100(0000) (SC-Seca) id 009f with ecm 16a8/80 (new)
Nov 20 18:54:25.902 CAM(core.ecm): 0.1: try system SC-Seca (0100) id 009f with ecm 5f0 (pri=-5)
Nov 20 18:54:25.902 CAM(core.ecm): 0.2: try system SC-Seca (0100) id 009f with ecm 708 (pri=-5)
Nov 20 18:54:25.963 CAM(sc-seca.error): update your subscription to view this channel
Nov 20 18:54:26.002 CAM(core.au): 0: chain caid 0100 -> SC-Seca(-5) Seca(-10) [00c1-82/ff/00] [00c9-84/ff/00] [00ca-84/ff/00] [014a-84/ff/00]
Nov 20 18:54:26.002 CAM(core.au): 0: chain caid 1821 -> Nagra2(-10) [00c1-82/fe/00]
Nov 20 18:54:26.002 CAM(core.au): 0: chain caid 1821 ++ [00c1-82/fe/00] [00c9-82/fe/00]
Nov 20 18:54:26.002 CAM(core.au): 0: chain caid 1821 ++ [00c1-82/fe/00] [00c9-82/fe/00] [00ca-82/fe/00]
Nov 20 18:54:26.002 CAM(core.au): 0: chain caid 1821 ++ [00c1-82/fe/00] [00c9-82/fe/00] [00ca-82/fe/00] [014a-82/fe/00]
Nov 20 18:54:26.002 CAM(core.au): 0: starting chain 0100
Nov 20 18:54:26.062 CAM(sc-seca.error): update your subscription to view this channel
Nov 20 18:54:26.163 CAM(core.ecm): 0.1: try system SC-Seca (0100) id 009f with ecm 11a8 (pri=-5)
Nov 20 18:54:26.262 CAM(sc-seca.error): update your subscription to view this channel
Nov 20 18:54:26.458 CAM(sc-seca.error): last message repeated 2 times
Nov 20 18:54:26.458 CAM(core.ecm): 0.1: try system SC-Seca (0100) id 009f with ecm 708 (pri=-5)
Nov 20 18:54:26.471 CAM(sc-seca.error): update your subscription to view this channel
Nov 20 18:54:26.474 CAM(core.ecm): 0.2: try system SC-Seca (0100) id 009f with ecm 16a8 (pri=-5)
Nov 20 18:54:26.521 CAM(sc-seca.error): update your subscription to view this channel
Nov 20 18:54:26.855 CAM(sc-seca.error): last message repeated 2 times
Nov 20 18:54:26.855 CAM(core.ecm): 0.1: try system SC-Seca (0100) id 009f with ecm 16a8 (pri=-5)
Nov 20 18:54:26.904 CAM(core.ecm): 0.2: try system Seca (0100) id 009f with ecm 708 (pri=-10)
Nov 20 18:54:26.905 CAM(sc-seca.error): update your subscription to view this channel
Nov 20 18:54:27.039 CAM(seca.ecm): Seca2 provider 009f not supported
Nov 20 18:54:27.089 CAM(sc-seca.error): update your subscription to view this channel
Nov 20 18:54:27.237 CAM(seca.ecm): Seca2 provider 009f not supported
Nov 20 18:54:27.276 CAM(core.ecm): 0.1: try system Seca (0100) id 009f with ecm 5f0 (pri=-10)
Nov 20 18:54:27.360 CAM(seca.ecm): Seca2 provider 009f not supported
Nov 20 18:54:27.423 CAM(core.ecm): 0.2: try system Seca (0100) id 009f with ecm 16a8 (pri=-10)
Nov 20 18:54:27.460 CAM(seca.ecm): Seca2 provider 009f not supported
Nov 20 18:54:27.472 CAM(core.ecm): system: no key found for S 009F 0C
Nov 20 18:54:27.560 CAM(core.ecm): 0.1: try system Seca (0100) id 009f with ecm 11a8 (pri=-10)
Nov 20 18:54:27.658 CAM(core.ecm): system: no key found for S 009F 0E
Nov 20 18:54:27.856 CAM(core.ecm): 0.2: CA descriptors for SID 9069 (len=38)
Nov 20 18:54:27.856 CAM(core.ecm): 0.2: descriptor 01 00 e7 08 00 9f ff 00 02 00 00 00 00 00 00 20 75
Nov 20 18:54:27.856 CAM(core.ecm): 0.2: found 0100(0000) (SC-Seca) id 009f with ecm 708/80 (already present)
Nov 20 18:54:27.856 CAM(core.ecm): 0.2: descriptor 01 00 f6 a8 00 9f ff 00 02 00 00 00 00 00 00 20 75
Nov 20 18:54:27.856 CAM(core.ecm): 0.2: found 0100(0000) (SC-Seca) id 009f with ecm 16a8/80 (already present)
Nov 20 18:54:27.857 CAM(core.ecm): 0.2: try system SC-Seca (0100) id 009f with ecm 708 (pri=-5)
Nov 20 18:54:27.857 CAM(core.ecm): 0.1: try system Seca (0100) id 009f with ecm 708 (pri=-10)
Nov 20 18:54:27.992 CAM(seca.ecm): Seca2 provider 009f not supported
Nov 20 18:54:27.992 CAM(sc-seca.error): update your subscription to view this channel
Nov 20 18:54:28.177 CAM(seca.ecm): Seca2 provider 009f not supported
Nov 20 18:54:28.180 CAM(sc-seca.error): update your subscription to view this channel
Nov 20 18:54:28.376 CAM(core.ecm): 0.2: try system SC-Seca (0100) id 009f with ecm 16a8 (pri=-5)
Nov 20 18:54:28.376 CAM(core.ecm): 0.1: try system Seca (0100) id 009f with ecm 16a8 (pri=-10)
Nov 20 18:54:28.426 CAM(core.ecm): system: no key found for S 009F 0C
Nov 20 18:54:28.429 CAM(sc-seca.error): update your subscription to view this channel
Nov 20 18:54:28.797 CAM(core.ecm): 0.1: CA descriptors for SID 9062 (len=114)
Nov 20 18:54:28.797 CAM(core.ecm): 0.2: try system Seca (0100) id 009f with ecm 708 (pri=-10)
Nov 20 18:54:28.797 CAM(core.ecm): 0.1: descriptor 01 00 e5 f0 00 9f ff 00 00 00 00 00 18 7c c0 00 21
Nov 20 18:54:28.797 CAM(core.ecm): 0.1: found 0100(0000) (SC-Seca) id 009f with ecm 5f0/80 (already present)
Nov 20 18:54:28.797 CAM(core.ecm): 0.1: descriptor 01 00 f1 a8 00 9f ff 00 00 00 00 00 18 7c c0 29 74
Nov 20 18:54:28.797 CAM(core.ecm): 0.1: found 0100(0000) (SC-Seca) id 009f with ecm 11a8/80 (already present)
Nov 20 18:54:28.797 CAM(core.ecm): 0.1: descriptor 01 00 e5 f0 00 9f ff 00 00 00 00 00 18 7c c0 00 21
Nov 20 18:54:28.797 CAM(core.ecm): 0.1: found 0100(0000) (SC-Seca) id 009f with ecm 5f0/80 (already present)
Nov 20 18:54:28.797 CAM(core.ecm): 0.1: descriptor 01 00 f1 a8 00 9f ff 00 00 00 00 00 18 7c c0 29 74
Nov 20 18:54:28.797 CAM(core.ecm): 0.1: found 0100(0000) (SC-Seca) id 009f with ecm 11a8/80 (already present)
Nov 20 18:54:28.797 CAM(core.ecm): 0.1: descriptor 01 00 e7 08 00 9f ff 00 02 00 00 00 00 00 00 20 75
Nov 20 18:54:28.798 CAM(core.ecm): 0.1: found 0100(0000) (SC-Seca) id 009f with ecm 708/80 (already present)
Nov 20 18:54:28.798 CAM(core.ecm): 0.1: descriptor 01 00 f6 a8 00 9f ff 00 02 00 00 00 00 00 00 20 75
Nov 20 18:54:28.798 CAM(core.ecm): 0.1: found 0100(0000) (SC-Seca) id 009f with ecm 16a8/80 (already present)
Nov 20 18:54:28.798 CAM(core.ecm): 0.1: try system SC-Seca (0100) id 009f with ecm 5f0 (pri=-5)
Nov 20 18:54:28.860 CAM(sc-seca.error): update your subscription to view this channel
Nov 20 18:54:28.945 CAM(seca.ecm): Seca2 provider 009f not supported
Nov 20 18:54:28.958 CAM(sc-seca.error): update your subscription to view this channel
Nov 20 18:54:29.058 CAM(core.ecm): 0.1: try system SC-Seca (0100) id 009f with ecm 11a8 (pri=-5)
Nov 20 18:54:29.131 CAM(seca.ecm): Seca2 provider 009f not supported
Nov 20 18:54:29.172 CAM(sc-seca.error): update your subscription to view this channel
Nov 20 18:54:29.329 CAM(core.ecm): 0.2: try system Seca (0100) id 009f with ecm 16a8 (pri=-10)
Nov 20 18:54:29.366 CAM(core.ecm): system: no key found for S 009F 0C

[snip]

Nov 20 18:55:32.830 CAM(core.smartcard): 0: -> INS: c1 40 01 b1 64
Nov 20 18:55:32.839 CAM(core.smartcard): 0: <- PROC: 40
Nov 20 18:55:32.966 CAM(core.smartcard): 0: -> DATA: 10 01 e2 3e 8a 30 dc 27 90 a3 53 2c 50 ce e4 b2 bd 43 f9 1f 2b ad be be c6 0d 88 21 a6 6e eb ba d8 c3 01 68 80 09 5e f0 2c 70 5a 5f 69 e4 98 09 0c 9d a3 70 5f 0e 36 aa 77 59 be 9a c9 e2 e4 86 cf c1 1c 80 0c 87 91 b9 c5 a6 e9 ee 01 28 37 17 a0 71 cb 9e c9 7f e0 6e 75 08 5e 42 91 3b 6c ae 34 94 66 84
Nov 20 18:55:33.344 CAM(core.smartcard): 0: <- PROC: 97 f8
Nov 20 18:55:33.344 CAM(core.smartcard): 0: unknown (status: 97 f8)
Nov 20 18:55:33.349 CAM(sc-seca.error): update your subscription to view this channel
Nov 20 18:56:03.546 CAM(sc-seca.error): last message repeated 36 times
Nov 20 18:56:25.983 CAM(sc-seca.error): last message repeated 63 times
Nov 20 18:56:25.983 CAM(core.auStats): EMM packet load average (1/4/10min)  118   44   17 pks/s
Nov 20 18:56:31.473 CAM(sc-seca.error): update your subscription to view this channel
Nov 20 18:57:01.483 CAM(sc-seca.error): last message repeated 33 times
Nov 20 18:57:26.007 CAM(sc-seca.error): last message repeated 74 times
Nov 20 18:57:26.007 CAM(core.auStats): EMM packet load average (1/4/10min)  118   74   29 pks/s
Nov 20 18:57:31.480 CAM(sc-seca.error): update your subscription to view this channel
Nov 20 18:58:01.576 CAM(sc-seca.error): last message repeated 34 times
Nov 20 18:58:26.031 CAM(sc-seca.error): last message repeated 73 times
Nov 20 18:58:26.031 CAM(core.auStats): EMM packet load average (1/4/10min)  123  105   42 pks/s
Nov 20 18:58:29.933 CAM: Got MSG_RESETSID
Nov 20 18:58:29.933 CAM(core.pids): 0: update SID 9069 (zero=0 noshift=0)
Nov 20 18:58:29.934 CAM(core.pids): 0: pids typ5=00cf typ5=04e3 typ5=0153 typ5=04e2 typ5=0119 typ5=00da typ5=0035 typ5=0074 typ5=00a9
Nov 20 18:58:29.934 CAM(core.pids): SimplyCa entry pidCa=0
Nov 20 18:58:29.934 CAM(core.pids): prgca: <empty>
Nov 20 18:58:29.934 CAM(core.pids): pidca 00cf: <empty>
Nov 20 18:58:29.934 CAM(core.pids): pidca 04e3: <empty>
Nov 20 18:58:29.934 CAM(core.pids): pidca 0153: <empty>
Nov 20 18:58:29.934 CAM(core.pids): pidca 04e2: <empty>



et ça continue

Désolé pour le monstrueux log...

manu_972
20/11/2010 23:41:59

Euh j'en rajoute encore un peu désolé, voici ce que j'ai aussi en boucle dans le log:

Nov 20 18:44:23.145 CAM(core.smartcard): 0: -> INS: c1 3c 02 0e 5c
Nov 20 18:44:23.156 CAM(core.smartcard): 0: <- PROC: 3c
Nov 20 18:44:23.272 CAM(core.smartcard): 0: -> DATA: 00 9f ae 25 28 03 1d 78 63 ab 98 b2 ee 35 69 90 e5 91 b2 e3 ba 6e 9f e4 46 f6 54 97 a4 cf 0b e2 14 d8 2a d4 3d 35 ac 07 12 69 de 07 5f 17 d2 09 e5 5a 5c b9 51 df 18 4c a2 6a 96 95 e4 b2 6c b5 4a 74 67 1b b4 e9 3e ca c8 5b 57 72 2c 6e 47 55 a9 f0 62 ea 68 4d 44 af b4 a1 f8 21
Nov 20 18:44:23.292 CAM(core.smartcard): 0: <- PROC: 90 24
Nov 20 18:44:23.293 CAM(core.smartcard): 0: unknown (status: 90 24)
Nov 20 18:44:23.293 CAM(core.smartcard): 0: -> INS: c1 3c 02 0e 5c
Nov 20 18:44:23.303 CAM(core.smartcard): 0: <- PROC: 3c
Nov 20 18:44:23.419 CAM(core.smartcard): 0: -> DATA: 00 9f ae 25 28 03 1d 78 63 ab 98 b2 ee 35 69 90 e5 91 b2 e3 ba 6e 9f e4 46 f6 54 97 a4 cf 0b e2 14 d8 2a d4 3d 35 ac 07 12 69 de 07 5f 17 d2 09 e5 5a 5c b9 51 df 18 4c a2 6a 96 95 e4 b2 6c b5 4a 74 67 1b b4 e9 3e ca c8 5b 57 72 2c 6e 47 55 a9 f0 62 ea 68 4d 44 af b4 a1 f8 21
Nov 20 18:44:23.440 CAM(core.smartcard): 0: <- PROC: 90 24
Nov 20 18:44:23.440 CAM(core.smartcard): 0: unknown (status: 90 24)
Nov 20 18:44:23.493 CAM(sc-seca.error): update your subscription to view this channel

Si quelqu'un sait lire ça je suis prenuer ;-)
Merci

manu_972
20/11/2010 23:40:27
FabriceMG a écrit :

bonjour,

Ca risque pas de décoder quelque chose, je ne vois pas dans ton log sasc se connectant sur newcs!

OK je suis un peu dense parfois. En fait j'utilise le fichier cardslot.conf ce qui, si j'ai pigé, permet à sasc de lire la carte directement par le port série, cf le fichier cardslot.conf:

----------------------
; Comment lines can start with # or ;
;

; cardslot with phoenix/smartmouse cardreader on serial port
;
; dev   - serial device e.g. /dev/ttyS0
; CD    - card detect 0=normal 1=inverted
; RST   - card reset  0=normal 1=inverted
; clock - clock frequency in Hz. If missing or 0, default=3571200
;
serial:/dev/ttyUSB0:0:0:3579545
-----------------------

Donc pas besoin de newcs. Voici donc le log quand je lance sasc (et que je me plante pas dans la ligne de commande ;-):

-------------------------
root@serveur:~/prog/mythtv/sc# LD_LIBRARY_PATH=/home/manu/prog/mythtv/sc/contrib/sasc-ng/sc/PLUGINS/lib/ sasc-ng -j 0:1 --cam-budget --sid-allpid --sid-nocache --cam-dir /etc/camfiles
Nov 20 18:35:15.623 : Version: 0.0.2-61975953edd0+
Nov 20 18:35:15.623 CAM: initializing plugin: SoftCam (1.0.0pre-HG-61975953edd0+): A software emulated CAM
Nov 20 18:35:15.623 CAM(general.info): SC version 1.0.0pre-HG-61975953edd0+ initializing (VDR 1.6.0)
Nov 20 18:35:15.623 CAM: starting plugin:
Nov 20 18:35:15.623 CAM(general.info): SC version 1.0.0pre-HG-61975953edd0+ starting (VDR 1.6.0)
Nov 20 18:35:15.623 CAM(core.load): ** Plugin config:
Nov 20 18:35:15.623 CAM(core.load): ** Key updates (AU) are enabled (active CAIDs) (no prestart)
Nov 20 18:35:15.623 CAM(core.load): ** Local systems DON'T take priority over cached remote
Nov 20 18:35:15.623 CAM(core.load): ** Concurrent FF recordings are NOT allowed
Nov 20 18:35:15.623 CAM(core.load): ** Force transfermode with digital audio
Nov 20 18:35:15.623 CAM(core.load): ** ECM cache is set to enabled
Nov 20 18:35:15.623 CAM(core.load): ** ScCaps are 1 2 0 0 0 0 0 0 0 0
Nov 20 18:35:15.623 CAM(general.error): failed open /etc/camfiles/cardclient.conf: No such file or directory
Nov 20 18:35:15.624 CAM(general.error): failed open /etc/camfiles/SoftCam.Key: No such file or directory
Nov 20 18:35:15.624 CAM(general.error): failed open /etc/camfiles/smartcard.conf: No such file or directory
Nov 20 18:35:15.624 CAM(general.info): loading cardslot config from /etc/camfiles/cardslot.conf
Nov 20 18:35:15.625 CAM(core.load): cardslot: added serial port /dev/ttyUSB0 as port 0 (normal CD, normal RESET, CLOCK 3579545)
Nov 20 18:35:15.626 CAM(general.error): failed open /etc/camfiles/override.conf: No such file or directory
Nov 20 18:35:15.626 CAM(general.error): no keys loaded for softcam!
Nov 20 18:35:15.626 CAM(core.load): ** registered systems:
Nov 20 18:35:15.626 CAM(core.load): ** Cardclient        (pri -15)
Nov 20 18:35:15.626 CAM(core.load): ** Conax             (pri -10)
Nov 20 18:35:15.626 CAM(core.load): ** ConstCW           (pri -20)
Nov 20 18:35:15.626 CAM(core.load): ** Cryptoworks       (pri -10)
Nov 20 18:35:15.626 CAM(core.load): ** Irdeto            (pri -10)
Nov 20 18:35:15.626 CAM(core.load): ** Irdeto2           (pri  -8)
Nov 20 18:35:15.626 CAM(core.load): ** Nagra             (pri -10)
Nov 20 18:35:15.626 CAM(core.load): ** Nagra2            (pri -10)
Nov 20 18:35:15.626 CAM(core.load): ** Fake-NDS          (pri -12)
Nov 20 18:35:15.626 CAM(core.load): ** SC-Conax          (pri  -5)
Nov 20 18:35:15.626 CAM(core.load): ** SC-Cryptoworks    (pri  -5)
Nov 20 18:35:15.626 CAM(core.load): ** SC-Irdeto         (pri  -5)
Nov 20 18:35:15.626 CAM(core.load): ** SC-Nagra          (pri  -5)
Nov 20 18:35:15.626 CAM(core.load): ** SC-Seca           (pri  -5)
Nov 20 18:35:15.626 CAM(core.load): ** SC-Viaccess       (pri  -5)
Nov 20 18:35:15.626 CAM(core.load): ** SC-VideoGuard2    (pri  -5)
Nov 20 18:35:15.626 CAM(core.smartcard): 0: new card inserted
Nov 20 18:35:15.626 CAM(core.load): ** Seca              (pri -10)
Nov 20 18:35:15.626 CAM(core.load): ** @SHL              (pri -10)
Nov 20 18:35:15.626 CAM(core.load): ** Viaccess          (pri -10)
Nov 20 18:35:15.629 CAM(core.smartcard): 0: reseting card (sermode 8e2)
Nov 20 18:35:16.627 frontend: Starting thread on /dev/dvb/adapter1/frontend1
The thread scheduling parameters indicate:
policy = 0
priority = 0
Nov 20 18:35:16.630 dvr: Starting thread on /dev/dvb/adapter1/dvr1
The thread scheduling parameters indicate:
policy = 1
priority = 99
Nov 20 18:35:16.630 demux: Starting thread on /dev/dvb/adapter1/demux1
The thread scheduling parameters indicate:
policy = 0
priority = 0
Nov 20 18:35:16.630 : Listening on port 5456
Nov 20 18:35:16.775 CAM(core.smartcard): 0: <- ATR len=16: 3b f7 11 00 01 40 96 70 70 37 0e 6c b6 d6 90 00
Nov 20 18:35:16.775 CAM(core.smartcard): 0: direct convention detected
Nov 20 18:35:16.775 CAM(core.smartcard): 0: atr decoding TS=3b hist=7 Y1=f0 TA1=11 F=372 fs=5.0000 D=1.000000 TB1=00 TC1=01 N=1 TD1=40 T=0 Y2=40 TC2=96 WI=150 Y3=00
Nov 20 18:35:16.775 CAM(core.smartcard): 0: historical: 70 70 37 0e 6c b6 d6
Nov 20 18:35:16.775 CAM(core.smartcard): 0: historical: 'pp7.l..
Nov 20 18:35:16.775 CAM(core.smartcard): 0: atr checksum not given/not required
Nov 20 18:35:16.775 CAM(core.smartcard): 0: long atr read=16 len=14
Nov 20 18:35:16.775 CAM(core.smartcard): 0: indicated wwt(T0)=14967 ms, bwt(T1)=1596 ms (at 3.5795 MHz)
Nov 20 18:35:16.775 CAM(core.smartcard): 0: checking for Conax card
Nov 20 18:35:16.775 CAM(sc-conax.init): doesn't look like a Conax card
Nov 20 18:35:16.775 CAM(core.smartcard): 0: checking for Cryptoworks card
Nov 20 18:35:16.775 CAM(sc-cryptoworks.init): doesn't look like a Cryptoworks card
Nov 20 18:35:16.775 CAM(core.smartcard): 0: checking for Irdeto card
Nov 20 18:35:16.775 CAM(core.smartcard): 0: checking for Nagra card
Nov 20 18:35:16.776 CAM(core.smartcard): 0: checking for Seca card
Nov 20 18:35:16.776 CAM(sc-seca.init): cardtype: Canal+ NL 7.3
Nov 20 18:35:16.776 CAM(core.smartcard): 0: -> INS: c1 0e 00 00 08
Nov 20 18:35:16.784 CAM(core.smartcard): 0: <- PROC: 0e
Nov 20 18:35:16.797 CAM(core.smartcard): 0: <- DATA: 00 0a 00 00 06 9d 8b a2
Nov 20 18:35:16.800 CAM(core.smartcard): 0: <- PROC: 90 00
Nov 20 18:35:16.800 CAM(sc-seca.init): card serial number: 110988194
Nov 20 18:35:16.800 CAM(core.smartcard): 0: -> INS: c1 16 00 00 07
Nov 20 18:35:16.809 CAM(core.smartcard): 0: <- PROC: 16
Nov 20 18:35:16.835 CAM(core.smartcard): 0: <- DATA: 00 00 00 07 00 10 db
Nov 20 18:35:16.837 CAM(core.smartcard): 0: <- PROC: 90 00
Nov 20 18:35:16.837 CAM(sc-seca.init): card has 3 providers (0x0007)
Nov 20 18:35:16.837 CAM(sc-seca.init): reading info for provider index 0
Nov 20 18:35:16.837 CAM(core.smartcard): 0: -> INS: c1 12 00 00 19
Nov 20 18:35:16.846 CAM(core.smartcard): 0: <- PROC: 12
Nov 20 18:35:16.896 CAM(core.smartcard): 0: <- DATA: 00 00 53 45 43 41 20 20 20 20 20 20 20 20 20 20 20 20 00 00 00 00 00 00 00
Nov 20 18:35:16.899 CAM(core.smartcard): 0: <- PROC: 90 00
Nov 20 18:35:16.899 CAM(core.smartcard): 0: -> INS: c1 34 00 00 03
Nov 20 18:35:16.909 CAM(core.smartcard): 0: <- PROC: 34
Nov 20 18:35:16.914 CAM(core.smartcard): 0: -> DATA: 00 00 00
Nov 20 18:35:16.934 CAM(core.smartcard): 0: <- PROC: 90 00
Nov 20 18:35:16.934 CAM(core.smartcard): 0: -> INS: c1 32 00 00 0a
Nov 20 18:35:16.943 CAM(core.smartcard): 0: <- PROC: 32
Nov 20 18:35:16.974 CAM(core.smartcard): 0: <- DATA: 04 ff ff ff ff ff ff ff ff ff
Nov 20 18:35:16.976 CAM(core.smartcard): 0: <- PROC: 90 00
Nov 20 18:35:16.976 CAM(sc-seca.init): provider 0x0000 'SECA            ' expires 1990/00/00 pbm FFFFFFFFFFFFFFFF
Nov 20 18:35:16.976 CAM(sc-seca.init): reading info for provider index 1
Nov 20 18:35:16.976 CAM(core.smartcard): 0: -> INS: c1 12 01 00 19
Nov 20 18:35:16.985 CAM(core.smartcard): 0: <- PROC: 12
Nov 20 18:35:17.037 CAM(core.smartcard): 0: <- DATA: 00 9f 43 41 4e 41 4c 53 41 54 2d 20 20 20 20 20 20 20 00 76 8d 4c 29 9f 02
Nov 20 18:35:17.039 CAM(core.smartcard): 0: <- PROC: 90 00
Nov 20 18:35:17.039 CAM(core.smartcard): 0: -> INS: c1 34 00 00 03
Nov 20 18:35:17.048 CAM(core.smartcard): 0: <- PROC: 34
Nov 20 18:35:17.053 CAM(core.smartcard): 0: -> DATA: 00 00 00
Nov 20 18:35:17.071 CAM(core.smartcard): 0: <- PROC: 90 00
Nov 20 18:35:17.071 CAM(core.smartcard): 0: -> INS: c1 32 01 00 0a
Nov 20 18:35:17.080 CAM(core.smartcard): 0: <- PROC: 32
Nov 20 18:35:17.111 CAM(core.smartcard): 0: <- DATA: 83 00 00 00 0c 00 00 00 02 04
Nov 20 18:35:17.113 CAM(core.smartcard): 0: <- PROC: 90 00
Nov 20 18:35:17.113 CAM(sc-seca.init): provider 0x009f 'CANALSAT-       ' expires 2010/12/31 pbm 0000000C00000002
Nov 20 18:35:17.113 CAM(sc-seca.init): reading info for provider index 2
Nov 20 18:35:17.113 CAM(core.smartcard): 0: -> INS: c1 12 02 00 19
Nov 20 18:35:17.122 CAM(core.smartcard): 0: <- PROC: 12
Nov 20 18:35:17.174 CAM(core.smartcard): 0: <- DATA: 00 a0 43 41 4e 41 4c 53 41 54 45 4c 4c 49 54 45 32 20 00 00 00 00 00 00 00
Nov 20 18:35:17.176 CAM(core.smartcard): 0: <- PROC: 90 00
Nov 20 18:35:17.176 CAM(core.smartcard): 0: -> INS: c1 34 00 00 03
Nov 20 18:35:17.185 CAM(core.smartcard): 0: <- PROC: 34
Nov 20 18:35:17.190 CAM(core.smartcard): 0: -> DATA: 00 00 00
Nov 20 18:35:17.208 CAM(core.smartcard): 0: <- PROC: 90 00
Nov 20 18:35:17.208 CAM(core.smartcard): 0: -> INS: c1 32 02 00 0a
Nov 20 18:35:17.217 CAM(core.smartcard): 0: <- PROC: 32
Nov 20 18:35:17.249 CAM(core.smartcard): 0: <- DATA: 04 ff ff ff ff ff ff ff ff ff
Nov 20 18:35:17.252 CAM(core.smartcard): 0: <- PROC: 90 00
Nov 20 18:35:17.252 CAM(sc-seca.init): provider 0x00a0 'CANALSATELLITE2 ' expires 1990/00/00 pbm FFFFFFFFFFFFFFFF
-----------------------------

Bon après quand je lance mythtv-backend
et que j'essaye de regarder une chaine, ça décrypte pas et voici le message que j'ai en boucle:

Nov 20 18:40:55.183 CAM(core.ecm): 0.1: try system SC-Seca (0100) id 009f with ecm 11a8 (pri=-5)
Nov 20 18:40:55.282 CAM(sc-seca.error): update your subscription to view this channel

Donc là c'est mieux mais ma carte est valide (elle marche dans le décodeur et quand je la mets dans la CAM astoncrypt) j'ai vérifié mes droits avec gnutv -cammenu. Alors je sais pas si le problème vient du fait qu'il y a deux provider: CANALSATELLITE-  et CANALSATELLITE2, le deuxième n'ayant pas de droit, je comprens pas là.
Merci si vous pouvez éclairer ma lanterne.
A+

manu_972
20/11/2010 23:26:59
FabriceMG a écrit :

bonjour,

Ca risque pas de décoder quelque chose, je ne vois pas dans ton log sasc se connectant sur newcs!

Passe sur le chat IRC

PS: petite rectification, il est faux de dire qu'il n'est pas possible de décoder canalsat HD en dehors du décodeur officiel.

Ah désolé la petite s'est réveillée plus tôt que prévu j'ai pas pu faire grand'chose. Je fais quelques tests et je poste les logs dès que possible.
Merci

manu_972
20/11/2010 23:25:55
maxvoip a écrit :

Salut ,

Je possède la même carte  que toi et j'ai un abo canalsat qui fonctionne très bien. En ce qui concerne les chaines HD, tu ne pourras pas les décrypter même si ton abo le permets. En effet, seuls les décos officiels canalsat le permettent et ce avec une carte spéciale que tout le monde connait bien. Moi j'ai celle qui commence par 39 pour tous les abos dits "carte seule". Moi j'arrive à décoder les chaines HD sur ma carte sans problème genre ARTE HD, ZDF HD, etc...  Si ton faisceau se coupe lors des pluies, etc.. il se peut que le règlage de la parabole est médiocre, pense à vérifier avec du matériel précis (on ne sait jamais). Quelque soit la méthode que tu vas utiliser pour décrypter les chaines canalsat, le lecteur A, B, C ou Z va le faire si et seulement si le faisceau est continu !!!! Donc que tu utilises sasc ou un autre ...il lui faut le faisceau pour réaliser le décrytage...

Bon courage,

Merci pour les encouragements!
Je précise tout d'abord: ça décode nickel la plupart du temps, mais s'il y a un GROS nuage là ça peut déconner un peu et si ça dure ça abandonne, c'est ça qui m'embête. En effet si ça coupe le temps que la réception soit bonne et que ça reprend après pas de problème, et ça je pense que c'est jouable avec sasc-ng. De plus mon problème (que j'avais pas bien expliqué), c'est que la carte astoncrypt va carrément planter s'il y a bcp d'erreurs et là le seul moyen de s'en sortir c'est de la retirer et de la remettre, et là c'est un problème si je suis pas dans les parages.
Par contre tu as l'air de dire que ce n'est pas le même système de cryptage pour les chaines HD?
Tu peux m'en dire plus STP.
Merci

FabriceMG
20/11/2010 20:24:39

bonjour,

Ca risque pas de décoder quelque chose, je ne vois pas dans ton log sasc se connectant sur newcs!

Passe sur le chat IRC

PS: petite rectification, il est faux de dire qu'il n'est pas possible de décoder canalsat HD en dehors du décodeur officiel.

manu_972
20/11/2010 17:29:02

Ah bon on peut pas attacher de fichier hmm, je mets donc le log de sasc-ng lancé par la commande:

LD_LIBRARY_PATH=/home/manu/prog/mythtv/sc/contrib/sasc-ng/sc/PLUGINS/lib/ sasc-ng -j 0:1 --cam-budget --sid-allpid --sid-nocache

Partie: avant de lancer mythtv-backend
---------------------------------------------------
Nov 20 12:29:23.710 : Version: 0.0.2-61975953edd0+
Nov 20 12:29:23.711 CAM: initializing plugin: SoftCam (1.0.0pre-HG-61975953edd0+): A software emulated CAM
Nov 20 12:29:23.711 CAM(general.info): SC version 1.0.0pre-HG-61975953edd0+ initializing (VDR 1.6.0)
Nov 20 12:29:23.711 CAM: starting plugin:
Nov 20 12:29:23.711 CAM(general.info): SC version 1.0.0pre-HG-61975953edd0+ starting (VDR 1.6.0)
Nov 20 12:29:23.711 CAM(core.load): ** Plugin config:
Nov 20 12:29:23.711 CAM(core.load): ** Key updates (AU) are enabled (active CAIDs) (no prestart)
Nov 20 12:29:23.711 CAM(core.load): ** Local systems DON'T take priority over cached remote
Nov 20 12:29:23.711 CAM(core.load): ** Concurrent FF recordings are NOT allowed
Nov 20 12:29:23.711 CAM(core.load): ** Force transfermode with digital audio
Nov 20 12:29:23.711 CAM(core.load): ** ECM cache is set to enabled
Nov 20 12:29:23.711 CAM(core.load): ** ScCaps are 1 2 0 0 0 0 0 0 0 0
Nov 20 12:29:23.711 CAM(general.error): failed open ./sc_files/cardclient.conf: No such file or directory
Nov 20 12:29:23.711 CAM(general.error): failed open ./sc_files/SoftCam.Key: No such file or directory
Nov 20 12:29:23.711 CAM(general.error): failed open ./sc_files/smartcard.conf: No such file or directory
Nov 20 12:29:23.711 CAM(general.error): failed open ./sc_files/cardslot.conf: No such file or directory
Nov 20 12:29:23.712 CAM(general.error): failed open ./sc_files/override.conf: No such file or directory
Nov 20 12:29:23.712 CAM(general.error): no keys loaded for softcam!
Nov 20 12:29:23.712 CAM(core.load): ** registered systems:
Nov 20 12:29:23.712 CAM(core.load): ** Cardclient        (pri -15)
Nov 20 12:29:23.712 CAM(core.load): ** Conax             (pri -10)
Nov 20 12:29:23.712 CAM(core.load): ** ConstCW           (pri -20)
Nov 20 12:29:23.712 CAM(core.load): ** Cryptoworks       (pri -10)
Nov 20 12:29:23.712 CAM(core.load): ** Irdeto            (pri -10)
Nov 20 12:29:23.712 CAM(core.load): ** Irdeto2           (pri  -8)
Nov 20 12:29:23.712 CAM(core.load): ** Nagra             (pri -10)
Nov 20 12:29:23.712 CAM(core.load): ** Nagra2            (pri -10)
Nov 20 12:29:23.712 CAM(core.load): ** Fake-NDS          (pri -12)
Nov 20 12:29:23.712 CAM(core.load): ** SC-Conax          (pri  -5)
Nov 20 12:29:23.712 CAM(core.load): ** SC-Cryptoworks    (pri  -5)
Nov 20 12:29:23.712 CAM(core.load): ** SC-Irdeto         (pri  -5)
Nov 20 12:29:23.712 CAM(core.load): ** SC-Nagra          (pri  -5)
Nov 20 12:29:23.712 CAM(core.load): ** SC-Seca           (pri  -5)
Nov 20 12:29:23.712 CAM(core.load): ** SC-Viaccess       (pri  -5)
Nov 20 12:29:23.712 CAM(core.load): ** SC-VideoGuard2    (pri  -5)
Nov 20 12:29:23.712 CAM(core.load): ** Seca              (pri -10)
Nov 20 12:29:23.712 CAM(core.load): ** @SHL              (pri -10)
Nov 20 12:29:23.712 CAM(core.load): ** Viaccess          (pri -10)
Nov 20 12:29:24.713 frontend: Starting thread on /dev/dvb/adapter1/frontend1
The thread scheduling parameters indicate:
policy = 0
priority = 0
Nov 20 12:29:24.716 dvr: Starting thread on /dev/dvb/adapter1/dvr1
The thread scheduling parameters indicate:
policy = 1
priority = 99
Nov 20 12:29:24.716 demux: Starting thread on /dev/dvb/adapter1/demux1
The thread scheduling parameters indicate:
policy = 0
priority = 0

Après lancement du backend
--------------------------------------------------
Nov 20 12:29:24.716 : Listening on port 5456
Nov 20 12:30:34.830 CSA: Got command(1): I idx: 0 pid: 0
Nov 20 12:31:06.902 CSA: Got command(1): I idx: 0 pid: 0
Nov 20 12:31:06.914 CHANNEL: Clearing tuning cache due to switch cmd
Nov 20 12:31:07.916 CHANNEL: Clearing tuning cache due to switch cmd
Nov 20 12:31:08.050 CHANNEL: Clearing tuning cache due to switch cmd
Nov 20 12:31:08.066 CHANNEL: Clearing tuning cache due to switch cmd
Nov 20 12:31:08.066 CHANNEL: Tuning frontend (new)
Nov 20 12:31:08.066 CSA: Got command(1): I idx: 0 pid: 0
Nov 20 12:31:08.066 CHANNEL: Tuning frontend (new)
Nov 20 12:31:08.066 CSA: Got command(1): I idx: 0 pid: 0
Nov 20 12:31:08.501 CHANNEL: Clearing tuning cache due to switch cmd
Nov 20 12:31:38.549 CHANNEL: Clearing tuning cache due to switch cmd
Nov 20 12:31:38.549 CHANNEL: Tuning frontend (new)
Nov 20 12:31:38.549 CSA: Got command(1): I idx: 0 pid: 0
Nov 20 12:31:38.549 CHANNEL: Tuning frontend (new)
Nov 20 12:31:38.549 CSA: Got command(1): I idx: 0 pid: 0
Nov 20 12:31:39.898 CSA: Removing csa for rb: 1
Orbit: 00003255E
Nov 20 12:31:45.820 CAM(core.pids): 0: now tuned to source 8cb7(S120.7E) transponder 33895
Nov 20 12:31:45.820 CAM: SC completed  Tune cmd
Nov 20 12:31:45.820 CAM(core.pids): 0: update SID 9001 (zero=0 noshift=0)
Nov 20 12:31:45.820 CAM(core.pids): 0: pids typ5=00a0 typ5=0050 typ5=00da typ5=0119 typ5=04e2 typ5=0153 typ5=00ce typ5=0159 typ5=04e3 typ5=0155 typ5=00cf
Nov 20 12:31:45.820 CAM(core.pids): SimplyCa entry pidCa=0
Nov 20 12:31:45.821 CAM(core.pids): prgca: 09 07 18 21 F5 7C 02 00 9F 09 20 01 00 E5 DC 00 9F FF 00 00 00 00 04 18 5F 12 29 74 F5 7C 00 9F FF 00 00 00 00 04 18 5F 12 29 74 09 20 01 00 E5 DC 00 9F FF 00 00 00 00 04 18 5F 12 29 74 F5 7C 00 9F FF 00 00 00 00 04 18 5F 12 29 74 09 20 01 00 E7 08 00 9F FF 00 02 00 00 00 00 00 00 28 32 F6 A8 00 9F FF 00 02 00 00 00 00 00 00 28 32
Nov 20 12:31:45.821 CAM(core.pids): pidca 00a0: <empty>
Nov 20 12:31:45.821 CAM(core.pids): pidca 0050: <empty>
Nov 20 12:31:45.821 CAM(core.pids): pidca 00da: <empty>
Nov 20 12:31:45.821 CAM(core.pids): pidca 0119: <empty>
Nov 20 12:31:45.821 CAM(core.pids): pidca 04e2: <empty>
Nov 20 12:31:45.821 CAM(core.pids): pidca 0153: <empty>
Nov 20 12:31:45.821 CAM(core.pids): pidca 00ce: <empty>
Nov 20 12:31:45.821 CAM(core.pids): pidca 0159: <empty>
Nov 20 12:31:45.821 CAM(core.pids): pidca 04e3: <empty>
Nov 20 12:31:45.821 CAM(core.pids): pidca 0155: <empty>
Nov 20 12:31:45.821 CAM(core.pids): pidca 00cf: <empty>
Nov 20 12:31:45.821 CAM(core.pids): SimplyCa exit pidCa=0
Nov 20 12:31:45.821 CAM(core.pids): prgca: 09 07 18 21 F5 7C 02 00 9F 09 20 01 00 E5 DC 00 9F FF 00 00 00 00 04 18 5F 12 29 74 F5 7C 00 9F FF 00 00 00 00 04 18 5F 12 29 74 09 20 01 00 E5 DC 00 9F FF 00 00 00 00 04 18 5F 12 29 74 F5 7C 00 9F FF 00 00 00 00 04 18 5F 12 29 74 09 20 01 00 E7 08 00 9F FF 00 02 00 00 00 00 00 00 28 32 F6 A8 00 9F FF 00 02 00 00 00 00 00 00 28 32
Nov 20 12:31:45.821 CAM(core.pids): pidca 00a0: <empty>
Nov 20 12:31:45.821 CAM(core.pids): pidca 0050: <empty>
Nov 20 12:31:45.821 CAM(core.pids): pidca 00da: <empty>
Nov 20 12:31:45.821 CAM(core.pids): pidca 0119: <empty>
Nov 20 12:31:45.821 CAM(core.pids): pidca 04e2: <empty>
Nov 20 12:31:45.821 CAM(core.pids): pidca 0153: <empty>
Nov 20 12:31:45.821 CAM(core.pids): pidca 00ce: <empty>
Nov 20 12:31:45.821 CAM(core.pids): pidca 0159: <empty>
Nov 20 12:31:45.821 CAM(core.pids): pidca 04e3: <empty>
Nov 20 12:31:45.821 CAM(core.pids): pidca 0155: <empty>
Nov 20 12:31:45.821 CAM(core.pids): pidca 00cf: <empty>
Nov 20 12:31:45.821 CAM(core.pids): 0: SID=9001 zero=0 | sid=-/-/- zero=-/-/- idle=-/-/-
Nov 20 12:31:45.821 CAM(core.pids): 0: found handler for SID 9001 (0.1 idle=1 idx=1)
Nov 20 12:31:45.821 CAM(core.ecm): 0.1: setting new SID 9001
Nov 20 12:31:45.821 CAM(core.pids): 0.1: pids on entry
Nov 20 12:31:45.821 CAM(core.pids): 0.1: pids after delete
Nov 20 12:31:45.822 CAM(core.pids): 0: descrambling pid 00a0 on index 1
Called cSascDvbDevice::SetCaPid
Nov 20 12:31:45.822 CSA: Got command(1): P idx: 1 pid: 160
Nov 20 12:31:45.822 CAM(core.pids): 0: descrambling pid 0050 on index 1
Called cSascDvbDevice::SetCaPid
Nov 20 12:31:45.822 CSA: Got command(1): P idx: 1 pid: 80
Nov 20 12:31:45.822 CAM(core.pids): 0: descrambling pid 00da on index 1
Called cSascDvbDevice::SetCaPid
Nov 20 12:31:45.822 CSA: Got command(1): P idx: 1 pid: 218
Nov 20 12:31:45.822 CAM(core.pids): 0: descrambling pid 0119 on index 1
Called cSascDvbDevice::SetCaPid
Nov 20 12:31:45.822 CSA: Got command(1): P idx: 1 pid: 281
Nov 20 12:31:45.822 CAM(core.pids): 0: descrambling pid 04e2 on index 1
Called cSascDvbDevice::SetCaPid
Nov 20 12:31:45.822 CSA: Got command(1): P idx: 1 pid: 1250
Nov 20 12:31:45.822 CAM(core.pids): 0: descrambling pid 0153 on index 1
Called cSascDvbDevice::SetCaPid
Nov 20 12:31:45.822 CSA: Got command(1): P idx: 1 pid: 339
Nov 20 12:31:45.822 CAM(core.pids): 0: descrambling pid 00ce on index 1
Called cSascDvbDevice::SetCaPid
Nov 20 12:31:45.822 CSA: Got command(1): P idx: 1 pid: 206
Nov 20 12:31:45.822 CAM(core.pids): 0: descrambling pid 0159 on index 1
Called cSascDvbDevice::SetCaPid
Nov 20 12:31:45.822 CSA: Got command(1): P idx: 1 pid: 345
Nov 20 12:31:45.822 CAM(core.pids): 0: descrambling pid 04e3 on index 1
Called cSascDvbDevice::SetCaPid
Nov 20 12:31:45.822 CSA: Got command(1): P idx: 1 pid: 1251
Nov 20 12:31:45.822 CAM(core.pids): 0: descrambling pid 0155 on index 1
Called cSascDvbDevice::SetCaPid
Nov 20 12:31:45.822 CSA: Got command(1): P idx: 1 pid: 341
Nov 20 12:31:45.822 CAM(core.pids): 0: descrambling pid 00cf on index 1
Called cSascDvbDevice::SetCaPid
Nov 20 12:31:45.822 CSA: Got command(1): P idx: 1 pid: 207
Nov 20 12:31:45.822 CAM(core.pids): 0.1: pids after add typ5=00a0 typ5=0050 typ5=00da typ5=0119 typ5=04e2 typ5=0153 typ5=00ce typ5=0159 typ5=04e3 typ5=0155 typ5=00cf
Nov 20 12:31:45.822 CAM(core.ecm): 0.1: is no longer idle
Nov 20 12:31:45.822 MSG: Got unprocessed message type: 1
Nov 20 12:31:45.822 MSG: Got unprocessed message type: 1
Nov 20 12:31:45.823 MSG: Got unprocessed message type: 1
Nov 20 12:31:45.823 MSG: Got unprocessed message type: 1
Nov 20 12:31:45.823 MSG: Got unprocessed message type: 1
Nov 20 12:31:45.823 MSG: Got unprocessed message type: 1
Nov 20 12:31:45.823 MSG: Got unprocessed message type: 1
Nov 20 12:31:45.823 MSG: Got unprocessed message type: 1
Nov 20 12:31:45.823 MSG: Got unprocessed message type: 1
Nov 20 12:31:45.823 MSG: Got unprocessed message type: 1
Nov 20 12:31:45.882 CAM(core.ecm): 0.1: triggered SID -1/9001 idx -1/1 mode -1/0 -
Nov 20 12:31:45.883 CAM(core.ecm): 0.1: new caDescr: 09 07 18 21 F5 7C 02 00 9F 09 20 01 00 E5 DC 00 9F FF 00 00 00 00 04 18 5F 12 29 74 F5 7C 00 9F FF 00 00 00 00 04 18 5F 12 29 74 09 20 01 00 E5 DC 00 9F FF 00 00 00 00 04 18 5F 12 29 74 F5 7C 00 9F FF 00 00 00 00 04 18 5F 12 29 74 09 20 01 00 E7 08 00 9F FF 00 02 00 00 00 00 00 00 28 32 F6 A8 00 9F FF 00 02 00 00 00 00 00 00 28 32
Nov 20 12:31:45.883 CAM(core.ecm): 0.1: CA descriptors for SID 9001 (len=111)
Nov 20 12:31:45.883 CAM(core.ecm): 0.1: descriptor 18 21 f5 7c 02 00 9f
Nov 20 12:31:45.883 CAM(core.ecm): 0.1: found 1821(0000) (Nagra2) id 0000 with ecm 157c/80 (new)
Nov 20 12:31:45.883 CAM(core.ecm): 0.1: descriptor 01 00 e5 dc 00 9f ff 00 00 00 00 04 18 5f 12 29 74 f5 7c 00 9f ff 00 00 00 00 04 18 5f 12 29 74
Nov 20 12:31:45.883 CAM(core.ecm): 0.1: found 0100(0000) (Seca) id 009f with ecm 5dc/80 (new)
Nov 20 12:31:45.883 CAM(core.ecm): 0.1: found 0100(0000) (Seca) id 009f with ecm 157c/80 (dup) (new)
Nov 20 12:31:45.883 CAM(core.ecm): 0.1: descriptor 01 00 e5 dc 00 9f ff 00 00 00 00 04 18 5f 12 29 74 f5 7c 00 9f ff 00 00 00 00 04 18 5f 12 29 74
Nov 20 12:31:45.883 CAM(core.ecm): 0.1: found 0100(0000) (Seca) id 009f with ecm 5dc/80 (already present)
Nov 20 12:31:45.883 CAM(core.ecm): 0.1: found 0100(0000) (Seca) id 009f with ecm 157c/80 (dup) (already present)
Nov 20 12:31:45.883 CAM(core.ecm): 0.1: descriptor 01 00 e7 08 00 9f ff 00 02 00 00 00 00 00 00 28 32 f6 a8 00 9f ff 00 02 00 00 00 00 00 00 28 32
Nov 20 12:31:45.883 CAM(core.ecm): 0.1: found 0100(0000) (Seca) id 009f with ecm 708/80 (new)
Nov 20 12:31:45.883 CAM(core.ecm): 0.1: found 0100(0000) (Seca) id 009f with ecm 16a8/80 (new)
Nov 20 12:31:45.884 CAM(core.ecm): 0.1: try system Nagra2 (1821) id 0000 with ecm 157c (pri=-10)
Nov 20 12:31:45.932 CAM(core.au): 0: chain caid 0100 -> Seca(-10) [00c1-82/ff/00] [00c9-84/ff/00] [00ca-84/ff/00] [014a-84/ff/00]
Nov 20 12:31:45.932 CAM(core.au): 0: chain caid 1821 -> Nagra2(-10) [00c1-82/fe/00]
Nov 20 12:31:45.932 CAM(core.au): 0: chain caid 1821 ++ [00c1-82/fe/00] [00c9-82/fe/00]
Nov 20 12:31:45.932 CAM(core.au): 0: chain caid 1821 ++ [00c1-82/fe/00] [00c9-82/fe/00] [00ca-82/fe/00]
Nov 20 12:31:45.932 CAM(core.au): 0: chain caid 1821 ++ [00c1-82/fe/00] [00c9-82/fe/00] [00ca-82/fe/00] [014a-82/fe/00]
Nov 20 12:31:45.932 CAM(core.au): 0: starting chain 1821
Nov 20 12:31:46.055 CAM(nagra.ecm): bad ECM message msgLen=154 sctLen=100
Nov 20 12:31:46.439 CAM(core.au): 0: starting chain 0100
Nov 20 12:31:46.439 CAM(core.ecm): 0.1: try system Seca (0100) id 009f with ecm 5dc (pri=-10)
Nov 20 12:31:46.463 CAM(seca.ecm): Seca2 provider 009f not supported
Nov 20 12:31:46.848 CAM(core.ecm): 0.1: try system Seca (0100) id 009f with ecm 157c (pri=-10)
Nov 20 12:31:47.009 CAM(core.ecm): system: no key found for S 009F 0C
Nov 20 12:31:47.392 CAM(core.ecm): 0.1: try system Seca (0100) id 009f with ecm 708 (pri=-10)
Nov 20 12:31:47.503 CAM(seca.ecm): Seca2 provider 009f not supported
Nov 20 12:31:47.888 CAM(core.ecm): 0.1: try system Seca (0100) id 009f with ecm 16a8 (pri=-10)
Nov 20 12:31:47.949 CAM(core.ecm): system: no key found for S 009F 0C
Nov 20 12:31:48.333 CAM(core.ecm): 0.1: CA descriptors for SID 9001 (len=111)
Nov 20 12:31:48.333 CAM(core.ecm): 0.1: descriptor 18 21 f5 7c 02 00 9f
Nov 20 12:31:48.333 CAM(core.ecm): 0.1: found 1821(0000) (Nagra2) id 0000 with ecm 157c/80 (already present)
Nov 20 12:31:48.333 CAM(core.ecm): 0.1: descriptor 01 00 e5 dc 00 9f ff 00 00 00 00 04 18 5f 12 29 74 f5 7c 00 9f ff 00 00 00 00 04 18 5f 12 29 74
Nov 20 12:31:48.333 CAM(core.ecm): 0.1: found 0100(0000) (Seca) id 009f with ecm 5dc/80 (already present)
Nov 20 12:31:48.333 CAM(core.ecm): 0.1: found 0100(0000) (Seca) id 009f with ecm 157c/80 (dup) (already present)
Nov 20 12:31:48.333 CAM(core.ecm): 0.1: descriptor 01 00 e5 dc 00 9f ff 00 00 00 00 04 18 5f 12 29 74 f5 7c 00 9f ff 00 00 00 00 04 18 5f 12 29 74
Nov 20 12:31:48.334 CAM(core.ecm): 0.1: found 0100(0000) (Seca) id 009f with ecm 5dc/80 (already present)
Nov 20 12:31:48.334 CAM(core.ecm): 0.1: found 0100(0000) (Seca) id 009f with ecm 157c/80 (dup) (already present)
Nov 20 12:31:48.334 CAM(core.ecm): 0.1: descriptor 01 00 e7 08 00 9f ff 00 02 00 00 00 00 00 00 28 32 f6 a8 00 9f ff 00 02 00 00 00 00 00 00 28 32
Nov 20 12:31:48.334 CAM(core.ecm): 0.1: found 0100(0000) (Seca) id 009f with ecm 708/80 (already present)
Nov 20 12:31:48.334 CAM(core.ecm): 0.1: found 0100(0000) (Seca) id 009f with ecm 16a8/80 (already present)
Nov 20 12:31:48.334 CAM(core.ecm): 0.1: try system Nagra2 (1821) id 0000 with ecm 157c (pri=-10)
Nov 20 12:31:48.532 CAM(nagra.ecm): bad ECM message msgLen=154 sctLen=100
Nov 20 12:31:48.903 CAM(core.ecm): 0.1: try system Seca (0100) id 009f with ecm 5dc (pri=-10)
Nov 20 12:31:48.940 CAM(seca.ecm): Seca2 provider 009f not supported
Nov 20 12:31:49.485 CAM(seca.ecm): last message repeated 2 times
Nov 20 12:31:49.485 CAM(core.ecm): 0.1: try system Seca (0100) id 009f with ecm 157c (pri=-10)
Nov 20 12:31:49.497 CAM(core.ecm): system: no key found for S 009F 0C
Nov 20 12:31:50.166 CAM(core.ecm): 0.1: try system Seca (0100) id 009f with ecm 708 (pri=-10)
Nov 20 12:31:50.178 CAM(seca.ecm): Seca2 provider 009f not supported
Nov 20 12:31:50.562 CAM(core.ecm): 0.1: try system Seca (0100) id 009f with ecm 16a8 (pri=-10)
Nov 20 12:31:50.710 CAM(core.ecm): system: no key found for S 009F 0C
Nov 20 12:31:51.094 CAM(core.ecm): 0.1: CA descriptors for SID 9001 (len=111)
Nov 20 12:31:51.094 CAM(core.ecm): 0.1: descriptor 18 21 f5 7c 02 00 9f
Nov 20 12:31:51.094 CAM(core.ecm): 0.1: found 1821(0000) (Nagra2) id 0000 with ecm 157c/80 (already present)
Nov 20 12:31:51.094 CAM(core.ecm): 0.1: descriptor 01 00 e5 dc 00 9f ff 00 00 00 00 04 18 5f 12 29 74 f5 7c 00 9f ff 00 00 00 00 04 18 5f 12 29 74
Nov 20 12:31:51.094 CAM(core.ecm): 0.1: found 0100(0000) (Seca) id 009f with ecm 5dc/80 (already present)
Nov 20 12:31:51.095 CAM(core.ecm): 0.1: found 0100(0000) (Seca) id 009f with ecm 157c/80 (dup) (already present)
Nov 20 12:31:51.095 CAM(core.ecm): 0.1: descriptor 01 00 e5 dc 00 9f ff 00 00 00 00 04 18 5f 12 29 74 f5 7c 00 9f ff 00 00 00 00 04 18 5f 12 29 74
Nov 20 12:31:51.095 CAM(core.ecm): 0.1: found 0100(0000) (Seca) id 009f with ecm 5dc/80 (already present)
Nov 20 12:31:51.095 CAM(core.ecm): 0.1: found 0100(0000) (Seca) id 009f with ecm 157c/80 (dup) (already present)
Nov 20 12:31:51.095 CAM(core.ecm): 0.1: descriptor 01 00 e7 08 00 9f ff 00 02 00 00 00 00 00 00 28 32 f6 a8 00 9f ff 00 02 00 00 00 00 00 00 28 32
Nov 20 12:31:51.095 CAM(core.ecm): 0.1: found 0100(0000) (Seca) id 009f with ecm 708/80 (already present)
Nov 20 12:31:51.095 CAM(core.ecm): 0.1: found 0100(0000) (Seca) id 009f with ecm 16a8/80 (already present)
Nov 20 12:31:51.095 CAM(core.ecm): 0.1: try system Nagra2 (1821) id 0000 with ecm 157c (pri=-10)
Nov 20 12:31:59.921 CAM(nagra.ecm): bad ECM message msgLen=154 sctLen=100
Nov 20 12:32:00.293 CAM(core.ecm): 0.1: try system Seca (0100) id 009f with ecm 5dc (pri=-10)
Nov 20 12:32:00.330 CAM(seca.ecm): Seca2 provider 009f not supported
Nov 20 12:32:00.714 CAM(core.ecm): 0.1: try system Seca (0100) id 009f with ecm 157c (pri=-10)
Nov 20 12:32:00.862 CAM(core.ecm): system: no key found for S 009F 0C
Nov 20 12:32:01.246 CAM(core.ecm): 0.1: try system Seca (0100) id 009f with ecm 708 (pri=-10)
Nov 20 12:32:01.261 CAM(seca.ecm): Seca2 provider 009f not supported
Nov 20 12:32:01.642 CAM(core.ecm): 0.1: try system Seca (0100) id 009f with ecm 16a8 (pri=-10)
Nov 20 12:32:01.741 CAM(core.ecm): system: no key found for S 009F 0C
Nov 20 12:32:02.112 CAM(core.ecm): 0.1: CA descriptors for SID 9001 (len=111)
Nov 20 12:32:02.113 CAM(core.ecm): 0.1: descriptor 18 21 f5 7c 02 00 9f
Nov 20 12:32:02.113 CAM(core.ecm): 0.1: found 1821(0000) (Nagra2) id 0000 with ecm 157c/80 (already present)
Nov 20 12:32:02.113 CAM(core.ecm): 0.1: descriptor 01 00 e5 dc 00 9f ff 00 00 00 00 04 18 5f 12 29 74 f5 7c 00 9f ff 00 00 00 00 04 18 5f 12 29 74
Nov 20 12:32:02.113 CAM(core.ecm): 0.1: found 0100(0000) (Seca) id 009f with ecm 5dc/80 (already present)
Nov 20 12:32:02.113 CAM(core.ecm): 0.1: found 0100(0000) (Seca) id 009f with ecm 157c/80 (dup) (already present)
Nov 20 12:32:02.113 CAM(core.ecm): 0.1: descriptor 01 00 e5 dc 00 9f ff 00 00 00 00 04 18 5f 12 29 74 f5 7c 00 9f ff 00 00 00 00 04 18 5f 12 29 74
Nov 20 12:32:02.113 CAM(core.ecm): 0.1: found 0100(0000) (Seca) id 009f with ecm 5dc/80 (already present)
Nov 20 12:32:02.113 CAM(core.ecm): 0.1: found 0100(0000) (Seca) id 009f with ecm 157c/80 (dup) (already present)
Nov 20 12:32:02.113 CAM(core.ecm): 0.1: descriptor 01 00 e7 08 00 9f ff 00 02 00 00 00 00 00 00 28 32 f6 a8 00 9f ff 00 02 00 00 00 00 00 00 28 32
Nov 20 12:32:02.113 CAM(core.ecm): 0.1: found 0100(0000) (Seca) id 009f with ecm 708/80 (already present)
Nov 20 12:32:02.113 CAM(core.ecm): 0.1: found 0100(0000) (Seca) id 009f with ecm 16a8/80 (already present)
Nov 20 12:32:02.113 CAM(core.ecm): 0.1: try system Nagra2 (1821) id 0000 with ecm 157c (pri=-10)
Nov 20 12:32:02.113 CAM(core.ecm): 0.1: stopping message log until valid key is found
----------------------------------------------

maxvoip
20/11/2010 15:17:00

Salut ,

Je possède la même carte  que toi et j'ai un abo canalsat qui fonctionne très bien. En ce qui concerne les chaines HD, tu ne pourras pas les décrypter même si ton abo le permets. En effet, seuls les décos officiels canalsat le permettent et ce avec une carte spéciale que tout le monde connait bien. Moi j'ai celle qui commence par 39 pour tous les abos dits "carte seule". Moi j'arrive à décoder les chaines HD sur ma carte sans problème genre ARTE HD, ZDF HD, etc...  Si ton faisceau se coupe lors des pluies, etc.. il se peut que le règlage de la parabole est médiocre, pense à vérifier avec du matériel précis (on ne sait jamais). Quelque soit la méthode que tu vas utiliser pour décrypter les chaines canalsat, le lecteur A, B, C ou Z va le faire si et seulement si le faisceau est continu !!!! Donc que tu utilises sasc ou un autre ...il lui faut le faisceau pour réaliser le décrytage...

Bon courage,

manu_972
20/11/2010 14:46:03

Bonjour à tous,
j'habite en Martinique et j'ai un abo CanalSat Caraibes qui je pense est techniquement très proche de l'abo France: j'utilise un TT S2-3200 avec le CI et la carte CAM que j'utilise normalement est une astoncrypt que j'ai acheté en Métropole.
Je veux utiliser sasc à la place pour deux raisons: d'une part quand il y a mauvaise réception la CAM finit par couper donc on rate toute la fin de l'enregistrement, j'espère qu'avec sasc-ng ça sera plus tolérant.
D'autre part je veux m'acheter une nouvelle carte dvb-s2 qui n'a pas pour l'instant de CI; la raison est que canalsat ici n'a rien trouver de mieux que de mettre les chaines HD sur un transponder avec un "symbol rate" de 45Msps en DVB-S2 ce qu'aucune carte jusqu'à présent ne peut faire.
Bref j'ai un lecteur phoenix qui marche, newcs est installé et sasc-ng aussi. Problème il ne décrypte pas.
Voici les fichiers de conf. J'attache le log.

/etc/camfiles/cardslot.conf
------------------------------------
;
; Comment lines can start with # or ;
;

; cardslot with phoenix/smartmouse cardreader on serial port
;
; dev   - serial device e.g. /dev/ttyS0
; CD    - card detect 0=normal 1=inverted
; RST   - card reset  0=normal 1=inverted
; clock - clock frequency in Hz. If missing or 0, default=3571200
;
serial:/dev/ttyUSB0:0:0:3579545
------------------------------------

Pied de page des forums

Propulsé par FluxBB

Webmasteur SnouF

Hébergé par Tuxfamily

Valid XHTML 1.0 Strict