#26 04/06/2008 08:06:48

piratebab
Co-fondateur de MythTV-fr
Lieu : Sud Ouest
Inscription : 30/11/2007
Messages : 4 064
Mythbox

Re : Ads Tech Instant Tv Pci

Donc ce n'est pas 57, mais bien 58.
C'est quand même incroyable qu'on ne puisse pas mettre à jour facilement le noyau sur ubuntu. On se croirai dans le monde microsoft: prenez cz noyau, c'est ce qu'il y a de mieux pour vous (puisque j'en ai décidé ainsi contre votre grés smile)
Pour un peu je te suggèrerais de changer de distribution! Mais je ne veux pas faire de peine à snouf .....


Donc on va oublier cette histoire de noyau, et vivre avec le bug.
https://bugs.launchpad.net/ubuntu/+bug/212143
(Tu ne veux vraiment pas changer de distribution ? http://goodbye-microsoft.com/ lol)

donc repasse en kernel 2.6.24-12
N'oublie pas d'enlever les dépôts que tu as ajouté (via synaptic par ex). Les mises à jour qui ont eu lieu ont peut être changé la version de V4L et ta carte sera mieux reconnue.
Après le reboot, peux tu poster le résultat de lshw, et lspci -vv (juste la partie concernant ta carte).


Mais cette histoire de noyau me chiffonne.
Qu'est ce qui ne marche pas ?As tu recompilé les drivers graphique aprés changement de noyau ?


Mythuser depuis 2005

Hors ligne

#27 04/06/2008 08:26:30

Nelyo
Membre
Lieu : La Roche sur Yon
Inscription : 24/05/2008
Messages : 147
Mythbox

Re : Ads Tech Instant Tv Pci

Pour rien te cacher, j'avoue avoir pensé changer de distribution
Je vais quand même tenter de compiler le noyau 2.6.25
et essayer de résoudre mon problème graphique

Avec quel noyau tourne debian actuellement ?

Hors ligne

#28 04/06/2008 08:51:16

piratebab
Co-fondateur de MythTV-fr
Lieu : Sud Ouest
Inscription : 30/11/2007
Messages : 4 064
Mythbox

Re : Ads Tech Instant Tv Pci

Les paquets du 2.6.25 sont disponibles dans les dépôts de la testing.
Debian travaille différemment d'ubuntu. La version testing est mise à jour constamment, mais reste très stable (il existe une version SID, qui sert de test avant que les paquets passent en testing).


Mythuser depuis 2005

Hors ligne

#29 04/06/2008 09:03:43

Nelyo
Membre
Lieu : La Roche sur Yon
Inscription : 24/05/2008
Messages : 147
Mythbox

Re : Ads Tech Instant Tv Pci

Je vais essayer Debian
On verra bien si le noyau 2.6.25 permet de régler mon probleme de carte tv

Hors ligne

#30 04/06/2008 09:17:31

piratebab
Co-fondateur de MythTV-fr
Lieu : Sud Ouest
Inscription : 30/11/2007
Messages : 4 064
Mythbox

Re : Ads Tech Instant Tv Pci

OK, je te guiderai dans l'install. Il y a plus de chose à configurer que dans ubuntu, car l'install de base est minimale, et n'utilise aucun logiciel propriétaire. Ensuite chacun rajoute ce dont il a besoin.
Ca évite de surcharger la machine inutilement.


Mythuser depuis 2005

Hors ligne

#31 04/06/2008 13:40:37

SnouF
Webmasteur, développeurDéveloppeur de scripts pour mythtv (tel que des grabbeurs pour MythNetVision). S'occupe également du dépôt deb des scripts mythtv-fr et propose un dépôt mythtv-fixes pour debian (stable, testing et unstable).
Inscription : 02/11/2007
Messages : 4 565
Site Web Mythbox

Re : Ads Tech Instant Tv Pci

Je viens de tester les déport ci-dessus, et il n'y a effectivement pas de 2.5.25.

  * Je pense que c'est une très mauvaise idée de compiler le noyau manuellement sur ubuntu, ils vaux mieux passer sur une autre distrib.
  * Debian, sans connaissance de GNU/Linux je ne sais pas (j'ai bien écrit je ne sais pas) si c'est une bonne idée mais avec un parrain comme piratebab ça devrait très bien aller wink

Nelyo, comme solution de test tu peux peut-être faire un double boot debian/ubuntu pour voir ce qui te va la mieux.

Hors ligne

#32 04/06/2008 13:45:00

Nelyo
Membre
Lieu : La Roche sur Yon
Inscription : 24/05/2008
Messages : 147
Mythbox

Re : Ads Tech Instant Tv Pci

Me revoila sous Debian
Comment faire pour installer firefox sous debian? si cela possible
Comment charger le noyau 2.6.25 sous debian?
Comment installer mythtv ?

Dernière modification par Nelyo (04/06/2008 14:14:40)

Hors ligne

#33 04/06/2008 14:36:39

piratebab
Co-fondateur de MythTV-fr
Lieu : Sud Ouest
Inscription : 30/11/2007
Messages : 4 064
Mythbox

Re : Ads Tech Instant Tv Pci

Avant d'aller plus loin,
il faut faire les mises à jour.
Je suppose que tu es en debian testing (etch, noyau 2.6.18 il me semble)

Tout d'abord tu vas passer en testing (programmes plus récents).
Contrairement à ubuntu, tu as du créer un utilisateur root avec un mot de passe.
J'espère que tu t'en souviens!
Il ne faut jamais se servir de cet utilisateur pour l'usage courant. Tu as normalement créer un deuxième utilisateur. C'est celui la qu'il faut utiliser.
Pour lui donner les droits root, il y a plusieurs solutions.
Je vais t'indiquer les solutions en mode graphique.
Avec l'environnement KDE, la commande c'est kdesu, avec l'environnement gnome, c'est gksu.
Ne sachant pas lequel tu as installé, je t'indique les 2.

kdesu konqueror
gksu nautilus

Puis tu modifie le fichier /etc/apt/sources.list pour qu'il ne contiennent que les lignes suivantes.

## lenny
deb http://ftp.fr.debian.org/debian/ lenny main contrib non-free
deb-src http://ftp.fr.debian.org/debian/ lenny main contrib non-free
#debian-marillat
deb http://www.debian-multimedia.org lenny main
deb-src http://www.debian-multimedia.org lenny main
# security
deb http://security.debian.org/ lenny/updates main contrib non-free
deb-src http://security.debian.org/ lenny/updates main contrib non-free

Ensuite avec synaptic tu fais une mise à jour (ça risque d'étre long!)

Ensuite on verra pour le noyau 2.6.25 (il faut aller le chercher dnas la SID je pense, je n'ai pas de debian sous la min au boulot).


Mythuser depuis 2005

Hors ligne

#34 04/06/2008 15:49:23

piratebab
Co-fondateur de MythTV-fr
Lieu : Sud Ouest
Inscription : 30/11/2007
Messages : 4 064
Mythbox

Re : Ads Tech Instant Tv Pci

firefox s'appelle iceweassel sous debian (seul le logo change pour des questions de licence)


Mythuser depuis 2005

Hors ligne

#35 04/06/2008 17:24:03

SnouF
Webmasteur, développeurDéveloppeur de scripts pour mythtv (tel que des grabbeurs pour MythNetVision). S'occupe également du dépôt deb des scripts mythtv-fr et propose un dépôt mythtv-fixes pour debian (stable, testing et unstable).
Inscription : 02/11/2007
Messages : 4 565
Site Web Mythbox

Re : Ads Tech Instant Tv Pci

[HS] il existe d'autre navigateur que firefox ! epiphany (celui que j'utilise) sous gnome et konqueror sous kde.

Euh, piratebab, pour ma culture d'ubuntiste big_smile lenny c'est la version instable non ? L'actuel ubuntu ne serait-elle pas à comparer plutôt à Eatch ? Je pense que si on prend la version instable d'ubuntu (que je déconseil fortement) elle est aussi sous noyau 2.6.25.

Hors ligne

#36 04/06/2008 17:31:07

piratebab
Co-fondateur de MythTV-fr
Lieu : Sud Ouest
Inscription : 30/11/2007
Messages : 4 064
Mythbox

Re : Ads Tech Instant Tv Pci

Non, l'équivalent de ce que tu dis c'est l'expérimental.
ensuite il y a la SID, puis la testing (lenny), puis la stable (etch)
La plupart des gens utilisent la SID sur leur ordi perso.


Mythuser depuis 2005

Hors ligne

#37 04/06/2008 19:35:04

SnouF
Webmasteur, développeurDéveloppeur de scripts pour mythtv (tel que des grabbeurs pour MythNetVision). S'occupe également du dépôt deb des scripts mythtv-fr et propose un dépôt mythtv-fixes pour debian (stable, testing et unstable).
Inscription : 02/11/2007
Messages : 4 565
Site Web Mythbox

Re : Ads Tech Instant Tv Pci

Si un jour je passe à débian je te redemanderai ou me documenterais car je n'ai pas tout compris (ils maintiennent 4 versions ?) mais ne partons pas a la dérive, restons dans le sujet de départ wink. (et en fonction de comment ce passe l'installation de Neylo, qui sait peut-être que je vais faire le pas big_smile, mais j'aime bien le fait sur ubuntu de ne pas avoir besoin de configurer).

Hors ligne

#38 05/06/2008 01:22:23

Nelyo
Membre
Lieu : La Roche sur Yon
Inscription : 24/05/2008
Messages : 147
Mythbox

Re : Ads Tech Instant Tv Pci

la mise à jour synaptic est effectué
je suis prêt pour le noyau 2.6.25

Hors ligne

#39 05/06/2008 08:37:34

piratebab
Co-fondateur de MythTV-fr
Lieu : Sud Ouest
Inscription : 30/11/2007
Messages : 4 064
Mythbox

Re : Ads Tech Instant Tv Pci

Voila une bonne chose de faite.
Est ce que tout fonctionne bien ? Tu ne m'as pas dis si tu était avec gnome ou KDE comme environnement graphique (autre ...).

Etape suivante, mettre un peu de SID dans ta lenny (regarde ma réponse à snouf pour comprendre les versions sous debian)

Il faut commencer par compléter ton fichier /etc/apt/sources.list par les lignes suivantes:

## sid
deb http://ftp.fr.debian.org/debian/ sid main contrib non-free
deb-src http://ftp.fr.debian.org/debian/ sid main contrib non-free
#debian-marillat
deb http://www.debian-multimedia.org sid main
deb-src http://www.debian-multimedia.org sid main

Ensuite pour indiquer que tu veux rester en lenny il faut créer un fichier  /etc/apt/preferences (ou le modifier si il existe):

Package: *
Pin: release o=apt-build
Pin-Priority: 999

Package: *
Pin: release o=Debian,a=testing,l=Debian-Security
Pin-Priority: 998

Package: *
Pin: release o=Unofficial Multimedia Packages,a=testing,l=Unofficial Multimedia Packages
Pin-Priority: 997

Package: *
Pin: release o=Debian,a=testing,l=Debian
Pin-Priority: 996

Package: *
Pin: release o=volatile.debian.org,a=stable,l=debian-volatile
Pin-Priority: 995

Package: *
Pin: release o=Debian,a=stable,l=Debian-Security
Pin-Priority: 994

Package: *
Pin: release o=Unofficial Multimedia Packages,a=stable,l=Unofficial Multimedia Packages
Pin-Priority: 993

Package: *
Pin: release v=4.0*,o=Debian,a=stable,l=Debian
Pin-Priority: 992

Package: *
Pin: release o=Unofficial Multimedia Packages,a=unstable,l=Unofficial Multimedia Packages
Pin-Priority: 99

Package: *
Pin: release o=Debian,a=unstable,l=Debian
Pin-Priority: 98

source: http://forum.debian-fr.org/viewtopic.php?f=8&t=5659

Ensuite dans synaptic, tu mets à jour, et tu verras un paquet linux-image-2.6.25-2-686 (ou un numéro plus grand à la place du -2-, tout va si vite!).
Tu reboote, et tu es en 2.6.25.
Ensuite pour vérifier si ta carte est bien reconnue, les commandes habituelles:
lshw
lspci -vv
lsmod | grep saa171
dmesg

voila une étape de franchie

PS: pense à mettre à jour tes PCI ids


Mythuser depuis 2005

Hors ligne

#40 05/06/2008 09:37:52

piratebab
Co-fondateur de MythTV-fr
Lieu : Sud Ouest
Inscription : 30/11/2007
Messages : 4 064
Mythbox

Re : Ads Tech Instant Tv Pci

nota: n'installe pas encore mythtv, on va traiter le pb de la carte avant.
Si tu installes mythtv, le backend va utiliser la carte, et on ne pourra plus utiliser facilement un autre programme pour faire des tests (il faudrait arrêter le backendend à chaque fois qu'on fait un test).
Tu peux par contre installer mplayer.


Mythuser depuis 2005

Hors ligne

#41 05/06/2008 13:11:26

Nelyo
Membre
Lieu : La Roche sur Yon
Inscription : 24/05/2008
Messages : 147
Mythbox

Re : Ads Tech Instant Tv Pci

Oups !
Au redémarrage  je tombe sur un écran blanc bleutet

Hors ligne

#42 05/06/2008 15:31:51

piratebab
Co-fondateur de MythTV-fr
Lieu : Sud Ouest
Inscription : 30/11/2007
Messages : 4 064
Mythbox

Re : Ads Tech Instant Tv Pci

Peux tu STP préciser un peu
- c'est avec le noyau 2.6.25 ?
- A quel instant du démarrage ça se produit ?

Si tu fais ctrl + alt + backspace, que ce passe t il ?


Mythuser depuis 2005

Hors ligne

#43 05/06/2008 23:01:13

Nelyo
Membre
Lieu : La Roche sur Yon
Inscription : 24/05/2008
Messages : 147
Mythbox

Re : Ads Tech Instant Tv Pci

Pour être franc
j'ai réessayé d'installer Debian 2 fois
et j'ai beaucoup de message d'erreur lors de la mise à jour des paquets synaptic
Je met en suspend l'installation de debian

Désolé (Je suis très pris sur beaucoup d'autres projets)
Un grand merci pour ton aide

J'ai réinstallé ubuntu
Un noyau 2.6.25 devrait voir le jour pour octobre
et j'espère résoudra mes problèmes

Je compte installer une hvr 1100 pour mon HTPC
en espérant que cela ce déroulera sans trop d'accros ....(histoire à suivre)

Dernière modification par Nelyo (05/06/2008 23:01:31)

Hors ligne

#44 05/06/2008 23:21:37

piratebab
Co-fondateur de MythTV-fr
Lieu : Sud Ouest
Inscription : 30/11/2007
Messages : 4 064
Mythbox

Re : Ads Tech Instant Tv Pci

Les message d'erreur ce n'est pas grave, il doit te manquer les clefs d'authentification sur les serveurs qui garantissent que les paquets sont bien ceux de debian. Mais ça marche quand même.
Pourquoi attendre octobre alors que le 2.6.25 debian est dispo depuis longtemps.
Tu n'a probablement pas un gros problème.
Réinstaller ne sert à rien sous linux, et en tout cas n'a jamais résolu un problème.


Mythuser depuis 2005

Hors ligne

#45 08/06/2008 11:29:26

Nelyo
Membre
Lieu : La Roche sur Yon
Inscription : 24/05/2008
Messages : 147
Mythbox

Re : Ads Tech Instant Tv Pci

J'ai rattaqué sous Ubuntu
J'ai réussi à installer le noyau 2.6.25 (il suffisait de ne pas activer les pilotes propriétaires)
mais cela ne résout pas mon problème : la tv ne veut pas se lancer
Je pense que j'ai un problème avec ma carte graphique
Que je lance la commande tvtime en console s'obtient :

Utilise tvtime 1.0.2.
Lit la configuration depuis /etc/tvtime/tvtime.xml
Lit la configuration depuis /home/lyonel/.tvtime/tvtime.xml
xvoutput: No XVIDEO port found which supports YUY2 images.

*** tvtime requires hardware YUY2 overlay support from your video card
*** driver.  If you are using an older NVIDIA card (TNT2), then
*** this capability is only available with their binary drivers.
*** For some ATI cards, this feature may be found in the experimental
*** GATOS drivers: http://gatos.souceforge.net/
*** If unsure, please check with your distribution to see if your
*** X driver supports hardware overlay surfaces.

En gros, je n'ai pas de carte graphique adéquate
je dois récupérer une carte avec une sortie tv, je fais les tests et je vous tiens au courant

Depuis que j'ai installé le nouveau noyau, je n'ai plus de son

Dernière modification par Nelyo (08/06/2008 11:31:31)

Hors ligne

#46 08/06/2008 12:38:29

SnouF
Webmasteur, développeurDéveloppeur de scripts pour mythtv (tel que des grabbeurs pour MythNetVision). S'occupe également du dépôt deb des scripts mythtv-fr et propose un dépôt mythtv-fixes pour debian (stable, testing et unstable).
Inscription : 02/11/2007
Messages : 4 565
Site Web Mythbox

Re : Ads Tech Instant Tv Pci

Ou ne pas utiliser tvtime hmm car là c'est tvtime qui pose problème.
dmesg | grep saa7 te donne quoi ? tu dois avoir une ligne qui t'indique ou la carte a été "montée"
Exemple chez moi : "[   53.073569] saa7133[0]: registered device video1 [v4l2]"

Ensuite tu y lance avec mplayer, "mplayer /dev/video1" (chez toi je pense "mplayer /dev/video0") tu devrais avoir de la neige.

PS : il faut peut être ajouter des options à mplayer mais je ne sais plus lequel.

Hors ligne

#47 08/06/2008 15:09:45

piratebab
Co-fondateur de MythTV-fr
Lieu : Sud Ouest
Inscription : 30/11/2007
Messages : 4 064
Mythbox

Re : Ads Tech Instant Tv Pci

Pour vérifier que tout c'est bien passé, un check complet:

lshw
lspci -vv
lsmod | grep saa171
dmesg

Il est important de savoir si ta carte est reconnuecorrectement maintenant, en particulier le secam.

Qu'est ce que tu appelles les pilotes propriétaires ? de la carte graphique ?


Mythuser depuis 2005

Hors ligne

#48 08/06/2008 17:42:14

Nelyo
Membre
Lieu : La Roche sur Yon
Inscription : 24/05/2008
Messages : 147
Mythbox

Re : Ads Tech Instant Tv Pci

Voici ce que me donne la commande dmesg | grep saa7:

[   10.319154] saa7130/34: v4l2 driver version 0.2.14 loaded
[   10.319207] saa7133[0]: found at 0000:04:04.0, rev: 208, irq: 16, latency: 64, mmio: 0xdfafd800
[   10.319212] saa7133[0]: subsystem: 1421:0004, board: UNKNOWN/GENERIC [card=0,autodetected]
[   10.319219] saa7133[0]: board init: gpio is 40
[   10.388674] saa7133[0]: i2c eeprom 00: 21 14 04 00 10 28 ff ff ff ff ff ff ff ff ff ff
[   10.388686] saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.388695] saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.388704] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.388713] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.388722] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.388731] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.388740] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.388749] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.388758] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.388766] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.388775] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.388784] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.388793] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.388802] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.388811] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.389215] saa7133[0]: registered device video0 [v4l2]
[   10.389320] saa7133[0]: registered device vbi0

La commande lshw me donne :

    description: Computer
    width: 32 bits
  *-core
       description: Motherboard
       physical id: 0
     *-memory
          description: System memory
          physical id: 0
          size: 2025MiB
     *-cpu
          product: Intel(R) Core(TM)2 CPU          6400  @ 2.13GHz
          vendor: Intel Corp.
          physical id: 1
          bus info: cpu@0
          version: 6.15.2
          serial: 0000-06F2-0000-0000-0000-0000
          size: 18EHz
          width: 64 bits
          capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx x86-64 constant_tsc arch_perfmon pebs bts pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm
          configuration: id=0
        *-logicalcpu:0
             description: Logical CPU
             physical id: 0.1
             width: 64 bits
             capabilities: logical
        *-logicalcpu:1
             description: Logical CPU
             physical id: 0.2
             width: 64 bits
             capabilities: logical
     *-pci
          description: Host bridge
          product: 82P965/G965 Memory Controller Hub
          vendor: Intel Corporation
          physical id: 100
          bus info: pci@0000:00:00.0
          version: 02
          width: 32 bits
          clock: 33MHz
        *-pci:0
             description: PCI bridge
             product: 82P965/G965 PCI Express Root Port
             vendor: Intel Corporation
             physical id: 1
             bus info: pci@0000:00:01.0
             version: 02
             width: 32 bits
             clock: 33MHz
             capabilities: pci normal_decode bus_master cap_list
             configuration: driver=pcieport-driver
           *-display:0 UNCLAIMED
                description: VGA compatible controller
                product: RV516 [Radeon X1300/X1550 Series]
                vendor: ATI Technologies Inc
                physical id: 0
                bus info: pci@0000:01:00.0
                version: 00
                width: 64 bits
                clock: 33MHz
                capabilities: vga_controller bus_master cap_list
                configuration: latency=0
           *-display:1 UNCLAIMED
                description: Display controller
                product: RV516 [Radeon X1300 Pro] (Secondary)
                vendor: ATI Technologies Inc
                physical id: 0.1
                bus info: pci@0000:01:00.1
                version: 00
                width: 64 bits
                clock: 33MHz
                capabilities: bus_master cap_list
                configuration: latency=0
        *-network
             description: Ethernet interface
             product: 82566DC Gigabit Network Connection
             vendor: Intel Corporation
             physical id: 19
             bus info: pci@0000:00:19.0
             logical name: eth0
             version: 02
             serial: 00:19:d1:2b:14:d8
             width: 32 bits
             clock: 33MHz
             capabilities: bus_master cap_list ethernet physical
             configuration: broadcast=yes driver=e1000e driverversion=0.2.0 firmware=1.1-0 ip=192.168.1.20 latency=0 module=e1000e multicast=yes
        *-usb:0
             description: USB Controller
             product: 82801H (ICH8 Family) USB UHCI Controller #4
             vendor: Intel Corporation
             physical id: 1a
             bus info: pci@0000:00:1a.0
             version: 02
             width: 32 bits
             clock: 33MHz
             capabilities: uhci bus_master
             configuration: driver=uhci_hcd latency=0 module=uhci_hcd
        *-usb:1
             description: USB Controller
             product: 82801H (ICH8 Family) USB UHCI Controller #5
             vendor: Intel Corporation
             physical id: 1a.1
             bus info: pci@0000:00:1a.1
             version: 02
             width: 32 bits
             clock: 33MHz
             capabilities: uhci bus_master
             configuration: driver=uhci_hcd latency=0 module=uhci_hcd
        *-usb:2
             description: USB Controller
             product: 82801H (ICH8 Family) USB2 EHCI Controller #2
             vendor: Intel Corporation
             physical id: 1a.7
             bus info: pci@0000:00:1a.7
             version: 02
             width: 32 bits
             clock: 33MHz
             capabilities: ehci bus_master cap_list
             configuration: driver=ehci_hcd latency=0 module=ehci_hcd
        *-multimedia UNCLAIMED
             description: Audio device
             product: 82801H (ICH8 Family) HD Audio Controller
             vendor: Intel Corporation
             physical id: 1b
             bus info: pci@0000:00:1b.0
             version: 02
             width: 64 bits
             clock: 33MHz
             capabilities: bus_master cap_list
             configuration: latency=0
        *-pci:1
             description: PCI bridge
             product: 82801H (ICH8 Family) PCI Express Port 1
             vendor: Intel Corporation
             physical id: 1c
             bus info: pci@0000:00:1c.0
             version: 02
             width: 32 bits
             clock: 33MHz
             capabilities: pci normal_decode bus_master cap_list
             configuration: driver=pcieport-driver
        *-pci:2
             description: PCI bridge
             product: 82801H (ICH8 Family) PCI Express Port 5
             vendor: Intel Corporation
             physical id: 1c.4
             bus info: pci@0000:00:1c.4
             version: 02
             width: 32 bits
             clock: 33MHz
             capabilities: pci normal_decode bus_master cap_list
             configuration: driver=pcieport-driver
        *-usb:3
             description: USB Controller
             product: 82801H (ICH8 Family) USB UHCI Controller #1
             vendor: Intel Corporation
             physical id: 1d
             bus info: pci@0000:00:1d.0
             version: 02
             width: 32 bits
             clock: 33MHz
             capabilities: uhci bus_master
             configuration: driver=uhci_hcd latency=0 module=uhci_hcd
        *-usb:4
             description: USB Controller
             product: 82801H (ICH8 Family) USB UHCI Controller #2
             vendor: Intel Corporation
             physical id: 1d.1
             bus info: pci@0000:00:1d.1
             version: 02
             width: 32 bits
             clock: 33MHz
             capabilities: uhci bus_master
             configuration: driver=uhci_hcd latency=0 module=uhci_hcd
        *-usb:5
             description: USB Controller
             product: 82801H (ICH8 Family) USB UHCI Controller #3
             vendor: Intel Corporation
             physical id: 1d.2
             bus info: pci@0000:00:1d.2
             version: 02
             width: 32 bits
             clock: 33MHz
             capabilities: uhci bus_master
             configuration: driver=uhci_hcd latency=0 module=uhci_hcd
        *-usb:6
             description: USB Controller
             product: 82801H (ICH8 Family) USB2 EHCI Controller #1
             vendor: Intel Corporation
             physical id: 1d.7
             bus info: pci@0000:00:1d.7
             version: 02
             width: 32 bits
             clock: 33MHz
             capabilities: ehci bus_master cap_list
             configuration: driver=ehci_hcd latency=0 module=ehci_hcd
        *-pci:3
             description: PCI bridge
             product: 82801 PCI Bridge
             vendor: Intel Corporation
             physical id: 1e
             bus info: pci@0000:00:1e.0
             version: f2
             width: 32 bits
             clock: 33MHz
             capabilities: pci subtractive_decode bus_master cap_list
           *-usb:0
                description: USB Controller
                product: USB 1.1 Controller
                vendor: ALi Corporation
                physical id: 3
                bus info: pci@0000:04:03.0
                version: 03
                width: 32 bits
                clock: 66MHz
                capabilities: ohci bus_master cap_list
                configuration: driver=ohci_hcd latency=64 maxlatency=80 module=ohci_hcd
           *-usb:1
                description: USB Controller
                product: USB 1.1 Controller
                vendor: ALi Corporation
                physical id: 3.1
                bus info: pci@0000:04:03.1
                version: 03
                width: 32 bits
                clock: 66MHz
                capabilities: ohci bus_master cap_list
                configuration: driver=ohci_hcd latency=64 maxlatency=80 module=ohci_hcd
           *-usb:2
                description: USB Controller
                product: USB 2.0 Controller
                vendor: ALi Corporation
                physical id: 3.3
                bus info: pci@0000:04:03.3
                version: 01
                width: 32 bits
                clock: 66MHz
                capabilities: ehci bus_master cap_list
                configuration: driver=ehci_hcd latency=64 maxlatency=80 module=ehci_hcd
           *-firewire
                description: FireWire (IEEE 1394)
                product: M5253 P1394 OHCI 1.1 Controller
                vendor: ALi Corporation
                physical id: 3.4
                bus info: pci@0000:04:03.4
                version: 00
                width: 32 bits
                clock: 66MHz
                capabilities: ohci bus_master cap_list
                configuration: driver=ohci1394 latency=64 maxlatency=3 module=ohci1394
           *-multimedia
                description: Multimedia controller
                product: SAA7133/SAA7135 Video Broadcast Decoder
                vendor: Philips Semiconductors
                physical id: 4
                bus info: pci@0000:04:04.0
                version: d0
                width: 32 bits
                clock: 33MHz
                capabilities: bus_master cap_list
                configuration: driver=saa7134 latency=64 maxlatency=40 mingnt=16 module=saa7134
        *-isa
             description: ISA bridge
             product: 82801HH (ICH8DH) LPC Interface Controller
             vendor: Intel Corporation
             physical id: 1f
             bus info: pci@0000:00:1f.0
             version: 02
             width: 32 bits
             clock: 33MHz
             capabilities: isa bus_master cap_list
             configuration: latency=0
        *-storage
             description: RAID bus controller
             product: 82801 SATA RAID Controller
             vendor: Intel Corporation
             physical id: 1f.2
             bus info: pci@0000:00:1f.2
             version: 02
             width: 32 bits
             clock: 66MHz
             capabilities: storage bus_master cap_list
             configuration: driver=ahci latency=0 module=ahci
        *-serial UNCLAIMED
             description: SMBus
             product: 82801H (ICH8 Family) SMBus Controller
             vendor: Intel Corporation
             physical id: 1f.3
             bus info: pci@0000:00:1f.3
             version: 02
             width: 32 bits
             clock: 33MHz
             configuration: latency=0
  *-scsi
       physical id: 1
       bus info: scsi@6
       logical name: scsi6
       capabilities: scsi-host
       configuration: driver=usb-storage

La commande lspci -vv

00:00.0 Host bridge: Intel Corporation 82P965/G965 Memory Controller Hub (rev 02)
	Subsystem: Dell Unknown device 01db
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 0
	Capabilities: <access denied>

00:01.0 PCI bridge: Intel Corporation 82P965/G965 PCI Express Root Port (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: dfd00000-dfefffff
	Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
	Capabilities: <access denied>

00:19.0 Ethernet controller: Intel Corporation 82566DC Gigabit Network Connection (rev 02)
	Subsystem: Dell Unknown device 01db
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 219
	Region 0: Memory at dffe0000 (32-bit, non-prefetchable) [size=128K]
	Region 1: Memory at dffdb000 (32-bit, non-prefetchable) [size=4K]
	Region 2: I/O ports at ecc0 [size=32]
	Capabilities: <access denied>

00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
	Subsystem: Dell Unknown device 01db
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 4: I/O ports at ff20 [size=32]

00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02) (prog-if 00 [UHCI])
	Subsystem: Dell Unknown device 01db
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin B routed to IRQ 17
	Region 4: I/O ports at ff00 [size=32]

00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02) (prog-if 20 [EHCI])
	Subsystem: Dell Unknown device 01db
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin C routed to IRQ 22
	Region 0: Memory at dffdac00 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>

00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
	Subsystem: Dell Unknown device 01db
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at dffdc000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>

00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	Memory behind bridge: dfc00000-dfcfffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
	Capabilities: <access denied>

00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
	Capabilities: <access denied>

00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
	Subsystem: Dell Unknown device 01db
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 4: I/O ports at ff80 [size=32]

00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
	Subsystem: Dell Unknown device 01db
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin B routed to IRQ 17
	Region 4: I/O ports at ff60 [size=32]

00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
	Subsystem: Dell Unknown device 01db
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 4: I/O ports at ff40 [size=32]

00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02) (prog-if 20 [EHCI])
	Subsystem: Dell Unknown device 01db
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at ff980800 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev f2) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
	Memory behind bridge: dfa00000-dfbfffff
	Prefetchable memory behind bridge: 0000000088000000-00000000880fffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
	Capabilities: <access denied>

00:1f.0 ISA bridge: Intel Corporation 82801HH (ICH8DH) LPC Interface Controller (rev 02)
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Capabilities: <access denied>

00:1f.2 RAID bus controller: Intel Corporation 82801 SATA RAID Controller (rev 02)
	Subsystem: Dell Unknown device 01db
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin C routed to IRQ 220
	Region 0: I/O ports at fe00 [size=8]
	Region 1: I/O ports at fe10 [size=4]
	Region 2: I/O ports at fe20 [size=8]
	Region 3: I/O ports at fe30 [size=4]
	Region 4: I/O ports at fec0 [size=32]
	Region 5: Memory at ff970000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>

00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
	Subsystem: Dell Unknown device 01db
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin C routed to IRQ 10
	Region 0: Memory at dffdab00 (32-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at ece0 [size=32]

01:00.0 VGA compatible controller: ATI Technologies Inc RV516 [Radeon X1300/X1550 Series] (prog-if 00 [VGA controller])
	Subsystem: Dell Unknown device 0302
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M]
	Region 2: Memory at dfde0000 (64-bit, non-prefetchable) [size=64K]
	Region 4: I/O ports at dc00 [size=256]
	Expansion ROM at dfe00000 [disabled] [size=128K]
	Capabilities: <access denied>

01:00.1 Display controller: ATI Technologies Inc RV516 [Radeon X1300 Pro] (Secondary)
	Subsystem: Dell Unknown device 0303
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 64 bytes
	Region 0: Memory at dfdf0000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>

04:03.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) (prog-if 10 [OHCI])
	Subsystem: Belkin Unknown device 0517
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (20000ns max), Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 16
	Region 0: Memory at dfafe000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>

04:03.1 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) (prog-if 10 [OHCI])
	Subsystem: Belkin Unknown device 0517
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (20000ns max), Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 16
	Region 0: Memory at dfaff000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>

04:03.3 USB Controller: ALi Corporation USB 2.0 Controller (rev 01) (prog-if 20 [EHCI])
	Subsystem: Belkin Unknown device 0508
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (20000ns max), Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 19
	Region 0: Memory at dfafcf00 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>

04:03.4 FireWire (IEEE 1394): ALi Corporation M5253 P1394 OHCI 1.1 Controller (prog-if 10 [OHCI])
	Subsystem: Belkin Unknown device 0519
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (750ns max), Cache Line Size: 64 bytes
	Interrupt: pin C routed to IRQ 17
	Region 0: Memory at dfafd000 (32-bit, non-prefetchable) [size=2K]
	Expansion ROM at 88000000 [disabled] [size=64K]
	Capabilities: <access denied>

04:04.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decoder (rev d0)
	Subsystem: Ads Technologies Inc Unknown device 0004
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (4000ns min, 10000ns max)
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at dfafd800 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>

La commande lsmod | grep saa171 ne me donne rien
et la commande dmesg :

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Linux version 2.6.25 (root@lyonel-desktop) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Sat Jun 7 22:35:44 CEST 2008
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009a800 (usable)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007fe53c00 (usable)
[    0.000000]  BIOS-e820: 000000007fe53c00 - 000000007fe55c00 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007fe55c00 - 000000007fe57c00 (ACPI data)
[    0.000000]  BIOS-e820: 000000007fe57c00 - 0000000080000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
[    0.000000]  BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[    0.000000] 1150MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] Scan SMP from c0000000 for 1024 bytes.
[    0.000000] Scan SMP from c009fc00 for 1024 bytes.
[    0.000000] Scan SMP from c00f0000 for 65536 bytes.
[    0.000000] found SMP MP-table at [c00fe710] 000fe710
[    0.000000] Entering add_active_range(0, 0, 523859) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   523859
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   523859
[    0.000000] On node 0 totalpages: 523859
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2300 pages used for memmap
[    0.000000]   HighMem zone: 292183 pages, LIFO batch:31
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] DMI 2.3 present.
[    0.000000] ACPI: RSDP 000FEBF0, 0024 (r2 DELL  )
[    0.000000] ACPI: XSDT 000FD08B, 0064 (r1 DELL    B8K           14 ASL        61)
[    0.000000] ACPI: FACP 000FD1AB, 00F4 (r3 DELL    B8K           14 ASL        61)
[    0.000000] ACPI: DSDT FFFCD3F5, 333E (r1   DELL    dt_ex     1000 INTL 20050624)
[    0.000000] ACPI: FACS 7FE53C00, 0040
[    0.000000] ACPI: SSDT FFFD0A11, 009C (r1   DELL    st_ex     1000 INTL 20050624)
[    0.000000] ACPI: APIC 000FD29F, 0092 (r1 DELL    B8K           14 ASL        61)
[    0.000000] ACPI: BOOT 000FD331, 0028 (r1 DELL    B8K           14 ASL        61)
[    0.000000] ACPI: MCFG 000FD359, 003E (r1 DELL    B8K           14 ASL        61)
[    0.000000] ACPI: HPET 000FD397, 0038 (r1 DELL    B8K           14 ASL        61)
[    0.000000] ACPI: DUMY 7FE55C00, 0024 (r1 DELL    B8K           14 ASL        61)
[    0.000000] ACPI: SLIC 000FD3CF, 0176 (r1 DELL    B8K           14 ASL        61)
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 6:15 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] Processor #1 6:15 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[    0.000000] PM: Registered nosave memory: 000000000009a000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519767
[    0.000000] Kernel command line: root=UUID=045eeb34-db7b-418d-bd00-4a2976dce631 ro quiet splash
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 2128.110 MHz processor.
[    0.004000] Console: colour VGA+ 80x25
[    0.004000] console [tty0] enabled
[    0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.004000] Memory: 2026132k/2095436k available (2151k kernel code, 67924k reserved, 992k data, 368k init, 1177932k highmem)
[    0.004000] virtual kernel memory layout:
[    0.004000]     fixmap  : 0xfff4b000 - 0xfffff000   ( 720 kB)
[    0.004000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.004000]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[    0.004000]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[    0.004000]       .init : 0xc041b000 - 0xc0477000   ( 368 kB)
[    0.004000]       .data : 0xc0319fd0 - 0xc0412060   ( 992 kB)
[    0.004000]       .text : 0xc0100000 - 0xc0319fd0   (2151 kB)
[    0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[    0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[    0.004000] hpet clockevent registered
[    0.080007] Calibrating delay using timer specific routine.. 4259.39 BogoMIPS (lpj=8518796)
[    0.080025] Security Framework initialized
[    0.080030] SELinux:  Disabled at boot.
[    0.080033] Capability LSM initialized
[    0.080043] Mount-cache hash table entries: 512
[    0.080149] Initializing cgroup subsys ns
[    0.080153] Initializing cgroup subsys cpuacct
[    0.080165] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.080166] CPU: L2 cache: 2048K
[    0.080169] CPU: Physical Processor ID: 0
[    0.080170] CPU: Processor Core ID: 0
[    0.080172] using mwait in idle threads.
[    0.080176] Compat vDSO mapped to ffffe000.
[    0.080181] Checking 'hlt' instruction... OK.
[    0.097162] ACPI: Core revision 20070126
[    0.251107] CPU0: Intel(R) Core(TM)2 CPU          6400  @ 2.13GHz stepping 02
[    0.251121] Booting processor 1/1 ip 4000
[    0.004000] Initializing CPU#1
[    0.004000] Calibrating delay using timer specific routine.. 4256.00 BogoMIPS (lpj=8512008)
[    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.004000] CPU: L2 cache: 2048K
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 1
[    0.340468] CPU1: Intel(R) Core(TM)2 CPU          6400  @ 2.13GHz stepping 02
[    0.340484] Total of 2 processors activated (8515.40 BogoMIPS).
[    0.340623] ENABLING IO-APIC IRQs
[    0.340782] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.384024] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.384038] Brought up 2 CPUs
[    0.384060] CPU0 attaching sched-domain:
[    0.384062]  domain 0: span 03
[    0.384063]   groups: 01 02
[    0.384066] CPU1 attaching sched-domain:
[    0.384068]  domain 0: span 03
[    0.384069]   groups: 02 01
[    0.384266] net_namespace: 548 bytes
[    0.384276] Booting paravirtualized kernel on bare hardware
[    0.384421] NET: Registered protocol family 16
[    0.384583] EISA bus registered
[    0.384587] ACPI: bus type pci registered
[    0.384658] PCI: Using MMCONFIG for extended config space
[    0.384660] PCI: Using configuration type 1
[    0.384661] Setting up standard PCI resources
[    0.396934] ACPI: EC: Look up EC in DSDT
[    0.439440] ACPI: BIOS _OSI(Linux) query ignored
[    0.439442] ACPI: DMI System Vendor: Dell Inc.                
[    0.439444] ACPI: DMI Product Name: Dell DXP061                  
[    0.439445] ACPI: DMI Product Version: 
[    0.439447] ACPI: DMI Board Name: 0WG855
[    0.439448] ACPI: DMI BIOS Vendor: Dell Inc.                
[    0.439449] ACPI: DMI BIOS Date: 11/22/2007
[    0.439451] ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
[    0.439452] ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
[    0.457410] ACPI: Interpreter enabled
[    0.457412] ACPI: (supports S0 S3 S4 S5)
[    0.457423] ACPI: Using IOAPIC for interrupt routing
[    0.541558] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.542202] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[    0.542206] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
[    0.542784] PCI: Transparent bridge - 0000:00:1e.0
[    0.542809] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.543559] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
[    0.544177] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
[    0.544672] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[    0.545155] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI5._PRT]
[    1.472335] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[    1.473102] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[    1.473858] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
[    1.474607] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[    1.475367] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[    1.476128] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[    1.476893] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[    1.477641] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 9 10 11 12 15)
[    1.478078] Linux Plug and Play Support v0.97 (c) Adam Belay
[    1.478105] pnp: PnP ACPI init
[    1.478111] ACPI: bus type pnp registered
[    1.524292] pnpacpi: exceeded the max number of IO resources: 40 
[    1.525975] pnp: PnP ACPI: found 10 devices
[    1.525977] ACPI: ACPI bus type pnp unregistered
[    1.525980] PnPBIOS: Disabled by ACPI PNP
[    1.526183] PCI: Using ACPI for IRQ routing
[    1.526185] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[    1.532112] NET: Registered protocol family 8
[    1.532115] NET: Registered protocol family 20
[    1.532157] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    1.532162] hpet0: 3 64-bit timers, 14318180 Hz
[    1.536112] Switched to high resolution mode on CPU 0
[    1.152084] Switched to high resolution mode on CPU 1
[    1.540123] system 00:01: ioport range 0x800-0x85f has been reserved
[    1.540126] system 00:01: ioport range 0xc00-0xc7f has been reserved
[    1.540129] system 00:01: ioport range 0x860-0x8ff could not be reserved
[    1.540139] system 00:07: iomem range 0x0-0x9ffff could not be reserved
[    1.540142] system 00:07: iomem range 0x100000-0xffffff could not be reserved
[    1.540145] system 00:07: iomem range 0x1000000-0x7fe53bff could not be reserved
[    1.540149] system 00:07: iomem range 0xf0000-0xfffff could not be reserved
[    1.540151] system 00:07: iomem range 0xc0000-0xd7fff could not be reserved
[    1.540155] system 00:07: iomem range 0xfec00000-0xfecfffff could not be reserved
[    1.540158] system 00:07: iomem range 0xfee00000-0xfeefffff could not be reserved
[    1.540161] system 00:07: iomem range 0xffb00000-0xffbfffff could not be reserved
[    1.540164] system 00:07: iomem range 0xffc00000-0xffffffff could not be reserved
[    1.540170] system 00:08: ioport range 0x100-0x1fe has been reserved
[    1.540173] system 00:08: ioport range 0x200-0x277 has been reserved
[    1.540176] system 00:08: ioport range 0x280-0x2e7 has been reserved
[    1.540178] system 00:08: ioport range 0x2e8-0x2ef has been reserved
[    1.540181] system 00:08: ioport range 0x2f0-0x2f7 has been reserved
[    1.540184] system 00:08: ioport range 0x2f8-0x2ff has been reserved
[    1.540186] system 00:08: ioport range 0x300-0x377 has been reserved
[    1.540189] system 00:08: ioport range 0x380-0x3bb has been reserved
[    1.540192] system 00:08: ioport range 0x3c0-0x3e7 could not be reserved
[    1.540195] system 00:08: ioport range 0x3f6-0x3f7 has been reserved
[    1.540198] system 00:08: ioport range 0x400-0x4cf has been reserved
[    1.540200] system 00:08: ioport range 0x4d2-0x57f has been reserved
[    1.540203] system 00:08: ioport range 0x580-0x677 has been reserved
[    1.540206] system 00:08: ioport range 0x680-0x777 has been reserved
[    1.540208] system 00:08: ioport range 0x780-0x7bb has been reserved
[    1.540211] system 00:08: ioport range 0x7c0-0x7ff has been reserved
[    1.540214] system 00:08: ioport range 0x8e0-0x8ff has been reserved
[    1.540217] system 00:08: ioport range 0x900-0x9fe has been reserved
[    1.540219] system 00:08: ioport range 0xa00-0xafe has been reserved
[    1.540222] system 00:08: ioport range 0xb00-0xbfe has been reserved
[    1.540225] system 00:08: ioport range 0xc80-0xcaf has been reserved
[    1.540228] system 00:08: ioport range 0xcb0-0xcbf has been reserved
[    1.540231] system 00:08: ioport range 0xcc0-0xcf7 has been reserved
[    1.540233] system 00:08: ioport range 0xd00-0xdfe has been reserved
[    1.540236] system 00:08: ioport range 0xe00-0xefe has been reserved
[    1.540239] system 00:08: ioport range 0xf00-0xffe has been reserved
[    1.540243] system 00:08: ioport range 0x2000-0x20fe has been reserved
[    1.540246] system 00:08: ioport range 0x2100-0x21fe has been reserved
[    1.540249] system 00:08: ioport range 0x2200-0x22fe has been reserved
[    1.540252] system 00:08: ioport range 0x2300-0x23fe has been reserved
[    1.540255] system 00:08: ioport range 0x2400-0x24fe has been reserved
[    1.540258] system 00:08: ioport range 0x2500-0x25fe has been reserved
[    1.540260] system 00:08: ioport range 0x2600-0x26fe has been reserved
[    1.540263] system 00:08: ioport range 0x2700-0x27fe has been reserved
[    1.540266] system 00:08: ioport range 0x2800-0x28fe has been reserved
[    1.540269] system 00:08: ioport range 0x2900-0x29fe has been reserved
[    1.540272] system 00:08: ioport range 0x2a00-0x2afe has been reserved
[    1.540275] system 00:08: ioport range 0x2b00-0x2bfe has been reserved
[    1.540278] system 00:08: ioport range 0x2c00-0x2cfe has been reserved
[    1.540280] system 00:08: ioport range 0x2d00-0x2dfe has been reserved
[    1.540284] system 00:08: iomem range 0xe0000000-0xefffffff could not be reserved
[    1.540287] system 00:08: iomem range 0xfeda0000-0xfedacfff has been reserved
[    1.570800] PCI: Bridge: 0000:00:01.0
[    1.570802]   IO window: d000-dfff
[    1.570805]   MEM window: 0xdfd00000-0xdfefffff
[    1.570808]   PREFETCH window: 0x00000000c0000000-0x00000000cfffffff
[    1.570811] PCI: Bridge: 0000:00:1c.0
[    1.570813]   IO window: disabled.
[    1.570817]   MEM window: 0xdfc00000-0xdfcfffff
[    1.570819]   PREFETCH window: disabled.
[    1.570824] PCI: Bridge: 0000:00:1c.4
[    1.570825]   IO window: disabled.
[    1.570829]   MEM window: disabled.
[    1.570831]   PREFETCH window: disabled.
[    1.570837] PCI: Bridge: 0000:00:1e.0
[    1.570838]   IO window: disabled.
[    1.570842]   MEM window: 0xdfa00000-0xdfbfffff
[    1.570845]   PREFETCH window: 0x0000000088000000-0x00000000880fffff
[    1.570858] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[    1.570862] PCI: Setting latency timer of device 0000:00:01.0 to 64
[    1.570877] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[    1.570881] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[    1.570895] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
[    1.570899] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[    1.570908] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[    1.570916] NET: Registered protocol family 2
[    1.584153] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    1.584374] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    1.584706] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    1.584867] TCP: Hash tables configured (established 131072 bind 65536)
[    1.584869] TCP reno registered
[    1.588258] checking if image is initramfs... it is
[    4.840627] Freeing initrd memory: 46543k freed
[    4.840752] Simple Boot Flag at 0x7a set to 0x1
[    4.460458] audit: initializing netlink socket (disabled)
[    4.460472] type=2000 audit(1212946113.840:1): initialized
[    4.460658] highmem bounce pool size: 64 pages
[    4.462476] VFS: Disk quotas dquot_6.5.1
[    4.462541] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    4.462650] io scheduler noop registered
[    4.462652] io scheduler anticipatory registered
[    4.462653] io scheduler deadline registered
[    4.462662] io scheduler cfq registered (default)
[    4.462762] pci 0000:01:00.0: Boot video device
[    4.462851] PCI: Setting latency timer of device 0000:00:01.0 to 64
[    4.462880] assign_interrupt_mode Found MSI capability
[    4.462904] Allocate Port Service[0000:00:01.0:pcie00]
[    4.462935] Allocate Port Service[0000:00:01.0:pcie03]
[    4.463001] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[    4.463029] assign_interrupt_mode Found MSI capability
[    4.463057] Allocate Port Service[0000:00:1c.0:pcie00]
[    4.463087] Allocate Port Service[0000:00:1c.0:pcie02]
[    4.463116] Allocate Port Service[0000:00:1c.0:pcie03]
[    4.463186] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[    4.463214] assign_interrupt_mode Found MSI capability
[    4.463242] Allocate Port Service[0000:00:1c.4:pcie00]
[    4.463271] Allocate Port Service[0000:00:1c.4:pcie02]
[    4.463304] Allocate Port Service[0000:00:1c.4:pcie03]
[    4.463558] isapnp: Scanning for PnP cards...
[    4.816428] isapnp: No Plug & Play device found
[    4.838424] Real Time Clock Driver v1.12ac
[    4.838699] hpet_resources: 0xfed00000 is busy
[    4.838732] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[    4.839809] brd: module loaded
[    4.839865] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[    4.839993] PNP: No PS/2 controller found. Probing ports directly.
[    5.223459] serio: i8042 KBD port at 0x60,0x64 irq 1
[    5.223463] serio: i8042 AUX port at 0x60,0x64 irq 12
[    5.228424] mice: PS/2 mouse device common for all mice
[    5.228556] EISA: Probing bus 0 at eisa.0
[    5.228559] EISA: Cannot allocate resource for mainboard
[    5.228565] Cannot allocate resource for EISA slot 2
[    5.228597] EISA: Detected 0 cards.
[    5.228600] cpuidle: using governor ladder
[    5.228601] cpuidle: using governor menu
[    5.229003] NET: Registered protocol family 1
[    5.229026] Using IPI No-Shortcut mode
[    5.229141] registered taskstats version 1
[    5.229232] BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
[    5.229559] Freeing unused kernel memory: 368k freed
[    5.647233] fuse init (API version 7.9)
[    5.658106] ACPI: ACPI0007:00 is registered as cooling_device0
[    5.658155] ACPI: ACPI0007:01 is registered as cooling_device1
[    5.899474] usbcore: registered new interface driver usbfs
[    5.899494] usbcore: registered new interface driver hub
[    5.907438] usbcore: registered new device driver usb
[    5.908626] USB Universal Host Controller Interface driver v3.0
[    5.908658] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[    5.908667] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[    5.908670] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    5.908854] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    5.908880] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20
[    5.908988] usb usb1: configuration #1 chosen from 1 choice
[    5.909008] hub 1-0:1.0: USB hub found
[    5.909014] hub 1-0:1.0: 2 ports detected
[    5.557712] No dock devices found.
[    5.984270] SCSI subsystem initialized
[    5.984633] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[    6.001664] libata version 3.00 loaded.
[    6.012506] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22
[    6.012518] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[    6.012521] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    6.012543] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 2
[    6.016436] ehci_hcd 0000:00:1a.7: debug port 1
[    6.016442] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[    6.016451] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xdffdac00
[    6.028395] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    6.028496] usb usb2: configuration #1 chosen from 1 choice
[    6.028515] hub 2-0:1.0: USB hub found
[    6.028521] hub 2-0:1.0: 4 ports detected
[    6.036843] Floppy drive(s): fd0 is 1.44M
[    6.054394] FDC 0 is a post-1991 82077
[    6.132582] ACPI: PCI Interrupt 0000:04:03.4[C] -> GSI 17 (level, low) -> IRQ 17
[    6.184408] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  MMIO=[dfafd000-dfafd7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[    5.806804] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[    5.806818] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[    5.806821] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    5.806849] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
[    5.810763] ehci_hcd 0000:00:1d.7: debug port 1
[    5.810768] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[    5.810777] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff980800
[    5.824382] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    5.824479] usb usb3: configuration #1 chosen from 1 choice
[    5.824499] hub 3-0:1.0: USB hub found
[    5.824505] hub 3-0:1.0: 6 ports detected
[    6.317541] ACPI: PCI Interrupt 0000:00:1a.1[b] -> GSI 17 (level, low) -> IRQ 17
[    5.928510] ACPI: PCI Interrupt 0000:04:03.3[A] -> <7>PCI: Setting latency timer of device 0000:00:1a.1 to 64
[    5.928516] GSI 19 (level, low) -> IRQ 19
[    6.317560] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    5.928531] ehci_hcd 0000:04:03.3: EHCI Host Controller
[    6.317598] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    6.317623] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00
[    5.928584] ehci_hcd 0000:04:03.3: new USB bus registered, assigned bus number 5
[    5.928618] ehci_hcd 0000:04:03.3: debug port 1
[    5.928640] ehci_hcd 0000:04:03.3: irq 19, io mem 0xdfafcf00
[    6.317741] usb usb4: configuration #1 chosen from 1 choice
[    6.317760] hub 4-0:1.0: USB hub found
[    6.317766] hub 4-0:1.0: 2 ports detected
[    5.940385] ehci_hcd 0000:04:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    6.336418] end_request: I/O error, dev fd0, sector 0
[    6.352489] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[    6.352500] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[    6.352504] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    5.968382] usb usb5: configuration #1 chosen from 1 choice
[    5.968382] hub 5-0:1.0: USB hub found
[    5.968382] hub 5-0:1.0: 6 ports detected
[    6.372406] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    6.372406] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80
[    6.372406] usb usb6: configuration #1 chosen from 1 choice
[    6.372406] hub 6-0:1.0: USB hub found
[    6.372406] hub 6-0:1.0: 2 ports detected
[    6.420510] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 17 (level, low) -> IRQ 17
[    6.420522] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[    6.420526] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    6.420556] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    6.420580] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60
[    6.420698] usb usb7: configuration #1 chosen from 1 choice
[    6.420718] hub 7-0:1.0: USB hub found
[    6.420724] hub 7-0:1.0: 2 ports detected
[    6.436495] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[    6.436505] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[    6.436509] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    6.436536] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    6.436562] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
[    6.436686] usb usb8: configuration #1 chosen from 1 choice
[    6.436705] hub 8-0:1.0: USB hub found
[    6.436711] hub 8-0:1.0: 2 ports detected
[    6.052387] ahci 0000:00:1f.2: version 3.0
[    6.052387] ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 20
[    6.512428] usb 3-2: new high speed USB device using ehci_hcd and address 2
[    6.556418] usb 3-2: configuration #1 chosen from 1 choice
[    6.612430] usb 1-1: new low speed USB device using uhci_hcd and address 2
[    6.632213] ieee1394: Current remote IRM is not 1394a-2000 compliant, resetting...
[    6.660425] usb 1-1: configuration #1 chosen from 1 choice
[    6.716429] ieee1394: Node added: ID:BUS[0-00:1023]  GUID[0005950400002a2e]
[    6.716429] ieee1394: Host added: ID:BUS[0-01:1023]  GUID[0030bd051800127a]
[    6.724438] usb 1-2: new low speed USB device using uhci_hcd and address 3
[    6.200427] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
[    6.200432] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part 
[    6.200437] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[    6.200795] scsi0 : ahci
[    6.200846] scsi1 : ahci
[    6.200889] scsi2 : ahci
[    6.200928] scsi3 : ahci
[    6.200967] scsi4 : ahci
[    6.201005] scsi5 : ahci
[    6.201031] ata1: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970100 irq 220
[    6.201034] ata2: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970180 irq 220
[    6.201036] ata3: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970200 irq 220
[    6.201039] ata4: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970280 irq 220
[    6.201041] ata5: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970300 irq 220
[    6.201043] ata6: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970380 irq 220
[    6.756431] usb 1-2: configuration #1 chosen from 1 choice
[    6.256400] usbcore: registered new interface driver libusual
[    6.256400] usbcore: registered new interface driver hiddev
[    6.261326] Initializing USB Mass Storage driver...
[    6.261394] scsi6 : SCSI emulation for USB Mass Storage devices
[    6.802460] usb-storage: device found at 2
[    6.802462] usb-storage: waiting for device to settle before scanning
[    6.811084] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1:1.0/input/input1
[    6.811219] input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.0-1
[    6.820436] input: Dell Dell USB Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-2/1-2:1.0/input/input2
[    6.820436] input,hidraw1: USB HID v1.10 Mouse [Dell Dell USB Mouse] on usb-0000:00:1a.0-2
[    6.820436] usbcore: registered new interface driver usbhid
[    6.820436] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[    6.276402] usbcore: registered new interface driver usb-storage
[    6.276402] USB Mass Storage support registered.
[    6.860449] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    6.872439] ata1.00: ATA-7: ST3250820AS, 3.ADG, max UDMA/133
[    6.872439] ata1.00: 488281250 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    6.876439] ata1.00: configured for UDMA/133
[    6.952454] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    6.980869] ata2.00: ATAPI: SONY    DVD+/-RW AW-Q160S, KDS3, max UDMA/100
[    7.000447] ata2.00: configured for UDMA/100
[    7.076462] ata3: SATA link down (SStatus 0 SControl 300)
[    7.124464] ata4: SATA link down (SStatus 0 SControl 300)
[    7.176467] ata5: SATA link down (SStatus 0 SControl 300)
[    7.232471] ata6: SATA link down (SStatus 0 SControl 300)
[    6.424412] scsi 0:0:0:0: Direct-Access     ATA      ST3250820AS      3.AD PQ: 0 ANSI: 5
[    7.233519] scsi 1:0:0:0: CD-ROM            SONY     DVD+-RW AW-Q160S KDS3 PQ: 0 ANSI: 5
[    6.424568] ACPI: PCI Interrupt 0000:04:03.0[b] -> GSI 16 (level, low) -> IRQ 16
[    6.424583] ohci_hcd 0000:04:03.0: OHCI Host Controller
[    6.424623] ohci_hcd 0000:04:03.0: new USB bus registered, assigned bus number 9
[    6.424636] ohci_hcd 0000:04:03.0: irq 16, io mem 0xdfafe000
[    6.437536] usb usb9: configuration #1 chosen from 1 choice
[    6.437557] hub 9-0:1.0: USB hub found
[    6.437564] hub 9-0:1.0: 2 ports detected
[    6.448497] ACPI: PCI Interrupt 0000:04:03.1[b] -> GSI 16 (level, low) -> IRQ 16
[    6.448507] ohci_hcd 0000:04:03.1: OHCI Host Controller
[    6.448535] ohci_hcd 0000:04:03.1: new USB bus registered, assigned bus number 10
[    6.448545] ohci_hcd 0000:04:03.1: irq 16, io mem 0xdfaff000
[    6.465560] usb usb10: configuration #1 chosen from 1 choice
[    6.465581] hub 10-0:1.0: USB hub found
[    6.465587] hub 10-0:1.0: 2 ports detected
[    7.278657] Driver 'sd' needs updating - please use bus_type methods
[    7.278721] sd 0:0:0:0: [sda] 488281250 512-byte hardware sectors (250000 MB)
[    7.278732] sd 0:0:0:0: [sda] Write Protect is off
[    7.278734] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    7.278751] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    7.278798] sd 0:0:0:0: [sda] 488281250 512-byte hardware sectors (250000 MB)
[    7.278808] sd 0:0:0:0: [sda] Write Protect is off
[    7.278810] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    7.278827] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    7.278830]  sda:<4>Driver 'sr' needs updating - please use bus_type methods
[    7.300206]  sda1 sda2 < sda5 > sda3 sda4
[    7.300513] sd 0:0:0:0: [sda] Attached SCSI disk
[    6.515367] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    6.515383] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    7.305233] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[    7.305236] Uniform CD-ROM driver Revision: 3.20
[    7.305284] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    7.424476] PM: Starting manual resume from disk
[    7.424476] PM: Resume from partition 8:3
[    7.424476] PM: Checking hibernation image.
[    7.424476] PM: Resume from disk failed.
[    6.650099] kjournald starting.  Commit interval 5 seconds
[    7.448477] EXT3-fs: mounted filesystem with ordered data mode.
[    7.684495] usb-storage: device scan complete
[    6.884441] scsi 6:0:0:0: Direct-Access     TEAC     USB   HS-CF Card 4.00 PQ: 0 ANSI: 0
[    6.884441] scsi 6:0:0:1: Direct-Access     TEAC     USB   HS-xD/SM   4.00 PQ: 0 ANSI: 0
[    6.884441] scsi 6:0:0:2: Direct-Access     TEAC     USB   HS-MS Card 4.00 PQ: 0 ANSI: 0
[    6.884441] scsi 6:0:0:3: Direct-Access     TEAC     USB   HS-SD Card 4.00 PQ: 0 ANSI: 0
[    6.888638] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    6.888675] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    6.892442] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[    6.892442] sd 6:0:0:1: Attached scsi generic sg3 type 0
[    6.892442] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[    6.892442] sd 6:0:0:2: Attached scsi generic sg4 type 0
[    6.892442] sd 6:0:0:3: [sde] Attached SCSI removable disk
[    6.892442] sd 6:0:0:3: Attached scsi generic sg5 type 0
[    8.512541] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    8.629708] Linux agpgart interface v0.103
[    8.666341] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    8.717593] e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0
[    8.717596] e1000e: Copyright (c) 1999-2007 Intel Corporation.
[    8.718463] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 21 (level, low) -> IRQ 21
[    8.718474] PCI: Setting latency timer of device 0000:00:19.0 to 64
[    8.746806] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    8.772591] ACPI: Power Button (FF) [PWRF]
[    8.772686] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[    8.804584] ACPI: Power Button (CM) [VBTN]
[    8.846894] eth0: (PCI Express:2.5GB/s:Width x1) 00:19:d1:2b:14:d8
[    8.846896] eth0: Intel(R) PRO/1000 Network Connection
[    8.846918] eth0: MAC: 4, PHY: 6, PBA No: 1021ff-0ff
[    9.509773] iTCO_vendor_support: vendor-support=0
[    9.555902] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[    9.556298] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
[    9.556306] iTCO_wdt: No card detected
[    9.636087] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    9.644640] end_request: I/O error, dev fd0, sector 0
[    9.830105] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   10.021169] Linux video capture interface: v2.00
[   10.319154] saa7130/34: v4l2 driver version 0.2.14 loaded
[   10.319200] ACPI: PCI Interrupt 0000:04:04.0[A] -> GSI 16 (level, low) -> IRQ 16
[   10.319207] saa7133[0]: found at 0000:04:04.0, rev: 208, irq: 16, latency: 64, mmio: 0xdfafd800
[   10.319212] saa7133[0]: subsystem: 1421:0004, board: UNKNOWN/GENERIC [card=0,autodetected]
[   10.319219] saa7133[0]: board init: gpio is 40
[   10.388674] saa7133[0]: i2c eeprom 00: 21 14 04 00 10 28 ff ff ff ff ff ff ff ff ff ff
[   10.388686] saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.388695] saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.388704] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.388713] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.388722] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.388731] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.388740] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.388749] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.388758] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.388766] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.388775] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.388784] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.388793] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.388802] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.388811] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.389215] saa7133[0]: registered device video0 [v4l2]
[   10.389320] saa7133[0]: registered device vbi0
[   10.529209] lp: driver loaded but no devices found
[   10.625846] Adding 1951888k swap on /dev/sda3.  Priority:-1 extents:1 across:1951888k
[    9.544431] EXT3 FS on sda4, internal journal
[   11.096419] ip_tables: (C) 2000-2006 Netfilter Core Team
[   11.490657] toshiba_acpi: Unknown parameter `hotkeys_over_acpi'
[   10.802514] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[   12.048775] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[   12.048775] apm: disabled - APM is not SMP safe.
[   12.122025] ppdev: user-space parallel port driver
[   12.831340] Bluetooth: Core ver 2.11
[   12.831687] NET: Registered protocol family 31
[   12.831691] Bluetooth: HCI device and connection manager initialized
[   12.831694] Bluetooth: HCI socket layer initialized
[   11.618850] Bluetooth: L2CAP ver 2.9
[   11.618853] Bluetooth: L2CAP socket layer initialized
[   12.897497] Bluetooth: RFCOMM socket layer initialized
[   12.897508] Bluetooth: RFCOMM TTY layer initialized
[   12.897510] Bluetooth: RFCOMM ver 1.8
[   13.185249] eth0: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[   13.185253] eth0: 10/100 speed: disabling TSO
[   13.408862] [drm] Initialized drm 1.1.0 20060810
[   13.420863] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   13.420863] PCI: Setting latency timer of device 0000:01:00.0 to 64
[   13.420863] [drm] Initialized radeon 1.28.0 20060524 on minor 0
[   12.052767] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
[   13.557472] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
[   13.621031] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
[   13.621094] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
[   13.621142] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
[   13.628876] [drm] Setting GART location based on new memory map
[   13.628876] [drm] Loading R300 Microcode
[   13.628876] [drm] writeback test succeeded in 1 usecs
[   13.964897] NET: Registered protocol family 17
[   15.675111] NET: Registered protocol family 10
[   15.675507] lo: Disabled Privacy Extensions
[   17.925157] eth0: no IPv6 routers present

Hors ligne

#49 08/06/2008 19:57:40

piratebab
Co-fondateur de MythTV-fr
Lieu : Sud Ouest
Inscription : 30/11/2007
Messages : 4 064
Mythbox

Re : Ads Tech Instant Tv Pci

Bonsoir,
ta carte n'est toujours pas reconnue automatiquement.
Il faut passer les options au module:
sudo gedit /etc/modprobe.d/options

et tu ajoutes

options saa7134 card=58
options tuner secam=l

Esuite pour tout mettre à jour, tu fais un depmod -ae

Esuite tu rebootes, et tu fais un dmesg et un modinfo saa7134

Si les options que tu as passé ne sont pas prisent en compte, il faudra blacklister les modules au démarrage, puis les faire recharger avec les bonnes options (ce que tu fais avec tes modprobe dans rc.d, mais en plus propre).


Mythuser depuis 2005

Hors ligne

#50 08/06/2008 20:02:45

Nelyo
Membre
Lieu : La Roche sur Yon
Inscription : 24/05/2008
Messages : 147
Mythbox

Re : Ads Tech Instant Tv Pci

Pour la commande depmod -ae:

FATAL: Could not open /lib/modules/2.6.25/modules.dep.temp for writing: Permission denied

J'ai donc entrée la commande :

sudo depmod -ae

Qui a l'air d'avoir fonctionné

Hors ligne

Réponse rapide

Veuillez composer votre message et l'envoyer
Si vous êtes un être humain ne changez pas le contenu de ces deux champs.

Pied de page des forums

Propulsé par FluxBB

Webmasteur SnouF

Hébergé par Tuxfamily

Valid XHTML 1.0 Strict