#1 23/01/2008 15:06:13

diablo1
Invité

[MythTV+VDR-DVBs] Gentoo - Intégrer MythTV + VDR, Help!

Bonjour à la tuxfamily, je suis l'heureux possesseur d'une carte DVB-S skystar2, et celle-çi fonctione parfaitement sous VDR, support CAM compris. Pour cette raison et pour rendre l'envirronement plus convivial, je souhaiterais maintenant faire fonctionner VDR et MythTV ensemble, VDR comme Backend et MythTV comme Frontend, par ex.
Cela me permettrait de disposer d'un envirronement HTPC MythTV tout en conservant les fonctionnalités, notament support CAM de VDR.
Je sollicite votre aide, car je n'arrive pas à configurer MythTV correctement, j'en suis la avec mythtv-setup :

dragoon jay # mythtv-setup
Session management error: Authentication Rejected, reason : None of the authentication protocols specified are supported and host-based authentication failed
2008-01-23 15:05:06.705 Using runtime prefix = /usr
2008-01-23 15:05:06.718 DPMS is active.
2008-01-23 15:05:06.762 New DB connection, total: 1
2008-01-23 15:05:06.781 Connected to database 'mythconverg' at host: localhost
2008-01-23 15:05:06.783 Total desktop dim: 1024x768, with 1 screen[s].
2008-01-23 15:05:06.790 Using screen 0, 1024x768 at 0,0
2008-01-23 15:05:06.820 Current Schema Version: 1160
2008-01-23 15:05:06.862 Total desktop dim: 1024x768, with 1 screen[s].
2008-01-23 15:05:06.877 Using screen 0, 1024x768 at 0,0
2008-01-23 15:05:06.880 Switching to square mode (G.A.N.T.)
2008-01-23 15:05:06.918 Using the Qt painter
mythtv: unknown token "name" in /root/.mythtv/lircrc:14 ignored
mythtv: unknown token "bits" in /root/.mythtv/lircrc:15 ignored
mythtv: unknown token "flags" in /root/.mythtv/lircrc:16 ignored
mythtv: unknown token "eps" in /root/.mythtv/lircrc:17 ignored
mythtv: unknown token "aeps" in /root/.mythtv/lircrc:18 ignored
mythtv: unexpected token in line /root/.mythtv/lircrc:20
mythtv: unexpected token in line /root/.mythtv/lircrc:21
mythtv: unknown token "plead" in /root/.mythtv/lircrc:22 ignored
mythtv: unknown token "gap" in /root/.mythtv/lircrc:23 ignored
mythtv: unknown token "toggle_bit" in /root/.mythtv/lircrc:24 ignored
mythtv: bad file format, /root/.mythtv/lircrc:27
Failed to read lirc config /root/.mythtv/lircrc for mythtv
2008-01-23 15:05:07.907 Loading from: /usr/share/mythtv/themes/G.A.N.T./base.xml
2008-01-23 15:05:07.931 Loading from: /usr/share/mythtv/themes/default/base.xml

#2 23/01/2008 15:12:37

morphinux
Expert MythTV
Inscription : 14/12/2007
Messages : 1 401
Mythbox

Re : [MythTV+VDR-DVBs] Gentoo - Intégrer MythTV + VDR, Help!

Salut,

et que se passe-t-il ? te retrouves -tu dans l'interface graphique de mythtv-setup ? ça bloque en console ?

Hors ligne

#3 23/01/2008 15:15:39

diablo1
Invité

Re : [MythTV+VDR-DVBs] Gentoo - Intégrer MythTV + VDR, Help!

Je tourne sous Gentoo, et l'objectif et de créer un envirronement HTPC pour le DVB-x afin d'en rédiger une documentation complète pour cette distrib... J'ai beaucoup travailler sur VDR, et vous pouvez trouver une esquisse içi :

Gentoo Dbox2 HTPC

Je suis donc à la recherche de bonnes âmes qui souhaiterais participer au projet, je pense que l'esprit communautaire du forum devrait nous permettre de démocratiser le dvb-s sous Linux...

Merçi à tous pour votre aide !

Diablo1

#4 23/01/2008 15:22:08

diablo1
Invité

Re : [MythTV+VDR-DVBs] Gentoo - Intégrer MythTV + VDR, Help!

Salut Morphinux,

En fait mon envirronement VDR tourne nickel, LIRC + DVB-S +Disecq + Prise en charge des cartes off.
Avec MythTv compilé avec les options lirc, dvb, dts ... Un mythtv-setup lance l'envirronement; mais ma carte skystar2 n'apparait nul part, il semblerait qu'il ne connaissance que le support v4L...

#5 23/01/2008 15:34:55

morphinux
Expert MythTV
Inscription : 14/12/2007
Messages : 1 401
Mythbox

Re : [MythTV+VDR-DVBs] Gentoo - Intégrer MythTV + VDR, Help!

Choisi l'option "carte d'acquisition DVB (v3.x) et regarde ce qu'il indique dans le champ identifiant du frontend ...

Hors ligne

#6 23/01/2008 15:54:03

diablo1
Invité

Re : [MythTV+VDR-DVBs] Gentoo - Intégrer MythTV + VDR, Help!

Je ne vois pas cette option dans mythtv-setup, est-ce bien la que je dois la configurer ? J'ai bien sur arreter VDR !

Voiçi les logs : Prob avec LIRC et prob pour la prise en charge de la carte DVB-S, cf dernière ligne :

dragoon jay # mythtv-setup
Session management error: Authentication Rejected, reason : None of the authentication protocols specified are supported and host-based authentication failed
2008-01-23 15:48:31.534 Using runtime prefix = /usr
2008-01-23 15:48:31.543 DPMS is active.
2008-01-23 15:48:31.587 New DB connection, total: 1
2008-01-23 15:48:31.605 Connected to database 'mythconverg' at host: localhost
2008-01-23 15:48:31.607 Total desktop dim: 1024x768, with 1 screen[s].
2008-01-23 15:48:31.614 Using screen 0, 1024x768 at 0,0
2008-01-23 15:48:31.644 Current Schema Version: 1160
2008-01-23 15:48:31.686 Total desktop dim: 1024x768, with 1 screen[s].
2008-01-23 15:48:31.701 Using screen 0, 1024x768 at 0,0
2008-01-23 15:48:31.704 Switching to square mode (G.A.N.T.)
2008-01-23 15:48:31.742 Using the Qt painter
mythtv: unknown token "name" in /root/.mythtv/lircrc:14 ignored
mythtv: unknown token "bits" in /root/.mythtv/lircrc:15 ignored
mythtv: unknown token "flags" in /root/.mythtv/lircrc:16 ignored
mythtv: unknown token "eps" in /root/.mythtv/lircrc:17 ignored
mythtv: unknown token "aeps" in /root/.mythtv/lircrc:18 ignored
mythtv: unexpected token in line /root/.mythtv/lircrc:20
mythtv: unexpected token in line /root/.mythtv/lircrc:21
mythtv: unknown token "plead" in /root/.mythtv/lircrc:22 ignored
mythtv: unknown token "gap" in /root/.mythtv/lircrc:23 ignored
mythtv: unknown token "toggle_bit" in /root/.mythtv/lircrc:24 ignored
mythtv: bad file format, /root/.mythtv/lircrc:27
Failed to read lirc config /root/.mythtv/lircrc for mythtv
2008-01-23 15:48:32.727 Loading from: /usr/share/mythtv/themes/G.A.N.T./base.xml
2008-01-23 15:48:32.751 Loading from: /usr/share/mythtv/themes/default/base.xml
2008-01-23 15:48:38.870 DiSEqCDevTree, Warning: No device tree for cardid 0

#7 23/01/2008 16:15:31

diablo1
Invité

Re : [MythTV+VDR-DVBs] Gentoo - Intégrer MythTV + VDR, Help!

Merçi Morphinux, je viens de suivre ton conseil, et ai sélectionné l'option conseillée. Je viens donc de faire une avancée, j'ai le chois entre le support dvb-3x, freeboxtv(mon FAI), et dbox2. J'ai compilé mythtv comme ceçi :

# USE="dbox2 dvb dts freebox lirc lcd...." emerge -v mythtv

Le support dbox2 est très intéressant car il permet de récupérer un flux mpegts sur une ip:port, c'est exactement ce que je veux faire, flux vdr disponible avec un client xine, vdr-xineliboutput dans mon cas, voiçi les logs (backend puis frontend).

dragoon jay # vdr-sxfe
vdr-sxfe 1.0.0rc2  (build with xine-lib 1.1.8, using xine-lib 1.1.8)


VDR server not given, searching ...
Found VDR server: host 192.168.77.158, port 37890


Press Esc to exit

[12705] [input_vdr] Connecting (control) to tcp://192.168.77.158:37890 ...
[12705] [input_vdr] Server greeting: VDR-1.4.6 xineliboutput-1.0.0rc2 READY
[12705] [input_vdr] Connected (control) to tcp://192.168.77.158:37890
[12705] [input_vdr] Connecting (data) to pipe:///etc/vdr/plugins/xineliboutput/pipes.12638/pipe.0
[12705] [input_vdr] Data stream connected (PIPE)
AFD changed from -2 to -1
AFD changed from -2 to -1

Me voila donc avancer ! Petite question, j'ai bien un fichier /etc/lirc.conf mais comment générer ce lircrc qu'il semble manquer ?

#8 23/01/2008 16:36:28

diablo1
Invité

Re : [MythTV+VDR-DVBs] Gentoo - Intégrer MythTV + VDR, Help!

Identifiant du Frontend me retourne ST STV0299 DVB-S, la carte est donc bien pris en charge, merçi à toi. Le souçi c'est que VDR, le backend bloquait la carte DVB.

Je cherche à :   1- Faire fonctionner ma carte en Free2Air sans décrytage des bouquets payants
                        2- Récuperer le stream de la freeboxtv
                        3- Récupérer le stream VDR décrypté

Pourrais-tu m'aiguiller davantage pour faire fonctionner MythTV avec cette carte ou ces flux ? Tu utilises du DVB-T, le DVB-S devrait fonctionner de la même façon non ?

Merçi à toi !

#9 23/01/2008 17:39:03

morphinux
Expert MythTV
Inscription : 14/12/2007
Messages : 1 401
Mythbox

Re : [MythTV+VDR-DVBs] Gentoo - Intégrer MythTV + VDR, Help!

bon prenons les problèmes 1 par 1 wink

1- concernant ton fichier lircrc, l'as-tu crée déjà ? si oui, normalement il doit ce trouver dans /home/"user"/.mythtv/ sinon crée-le à cet endroit.
2- tu lances mythtv-setup en root donc il cherche le fichier .lircrc de l'utilisateur root qui n'existe pas donc si tu as crée le fichier lircrc, cherche à quel endroit il se trouve ... lance mythtv-setup en "user"

Pour le reste, on voit ça un peu plus tard dans la soirée, je dois partir ...

Dernière modification par morphinux (23/01/2008 17:40:29)

Hors ligne

#10 23/01/2008 17:56:34

diablo1
Invité

Re : [MythTV+VDR-DVBs] Gentoo - Intégrer MythTV + VDR, Help!

D'abord le souçi c'est que je ne sais pas comment generer ce fichier et/où le récuprer ? LIRC est pourtant fonctionnel ...
Je vais regarder ce que je peux trouver sur le net.

merçi @+

#11 23/01/2008 18:56:15

morphinux
Expert MythTV
Inscription : 14/12/2007
Messages : 1 401
Mythbox

Re : [MythTV+VDR-DVBs] Gentoo - Intégrer MythTV + VDR, Help!

alors pour générer un fichier lircrc, il faut déjà connaitre ton fichier /etc/lirc/lircd.conf .Copie-nous le resultat de ce fichier qui correspond aux codes de ta télécommande.

Si il n'y rien, alors il faudra le creer manuellement ...avec cette commande :

irrecord -f /etc/lirc/lircd.conf

Je te donnerais la procedure à suivre ...si tu as des problèmes wink

mais en attendant, tu peux lire ça (en anglais) :

http://lnx.manoweb.com/lirc/?partType=s … tName=lirc

Dernière modification par morphinux (23/01/2008 18:57:33)

Hors ligne

#12 23/01/2008 19:02:55

diablo1
Invité

Re : [MythTV+VDR-DVBs] Gentoo - Intégrer MythTV + VDR, Help!

J'ai pu trouver sur l'un des posts un lircrc fonctionnel :

 begin
    prog = mythtv
    button = Power
    config = Esc
end

begin
    prog = mythtv
    button = 1
    config = 1  
end

begin
    prog = mythtv
    button = 2
    config = 2  
end

[...]

begin
    prog = mythtv
    button = 0
    config = 0  
end

begin
    prog = mythtv
    button = tab
    config = +
end

begin
    prog = mythtv
    button = EPG
    config = S
end

begin
    prog = mythtv
    button = OSD
    config = M  
end

begin
   prog = mythtv
   button = RED
   config = D  
end

begin
   prog = mythtv
   button = Info
   config = I  
end

begin
  prog = mythtv
  button = VolumeUp
  repeat = 3
  config = F11  
end

begin
  prog = mythtv
  button = VolumeDown
  repeat = 3
  config = F10  
end

begin
    prog = mythtv
    button = Up
    repeat = 3
    config = Up
end

begin
    prog = mythtv
    button = ChannelUp
    repeat = 3
    config = Up
end

begin
    prog = mythtv
    button = Down
    repeat = 3
    config = Down
end

begin
    prog = mythtv
    button = ChannelDown
    repeat = 3
    config = Down
end

begin
    prog = mythtv
    button = Left
    repeat = 3
    config = Left
end

begin
    prog = mythtv
    button = Right
    repeat = 3
    config = Right
end

begin
    prog = mythtv
    button = Ok
    config = Return
end

begin
    prog = mythtv
    button = Mute
    config = F9  
end


begin
    prog = mythtv
    button = Previous
    config = Left  
end

begin
    prog = mythtv
    button = Play
    config = P  
end

begin
    prog = mythtv
    button = Next
    config = Right  
end

begin
  prog = mythtv
  button = Record
  config = R  
end

begin
    prog = mythtv
    button = Pause
    config = P  
end

LIRC OK!

#13 23/01/2008 19:39:13

piratebab
Co-fondateur de MythTV-fr
Lieu : Sud Ouest
Inscription : 30/11/2007
Messages : 4 064
Mythbox

Re : [MythTV+VDR-DVBs] Gentoo - Intégrer MythTV + VDR, Help!

Bonsoir,
et bienvenu sur mythtv-fr!
Pour lirc (et pour tout le reste d'ailleur) , j'ai fait un tuto pour une carte DVB-T
ICI

Je n'ai pas bien compris ce que tu veux faire:
- utiliser ta carte DVB-T avec mythtv ?
- récupérer un flux video dans mythtv ?

Dans tout les cas il te faut un backend mythtv et une base mythconvert, ce que tu as l'air d'avoir déja fait.
A priori ta carte DVB-S ne peut être gérée que par un seul applicatif à la fois. Donc si tu veux la faire gérer par mythtv, il faut arréter VDR.
Je ne connais pas VDR. Aurais tu un lien voir une  démo ?


Mythuser depuis 2005

Hors ligne

#14 23/01/2008 20:14:51

morphinux
Expert MythTV
Inscription : 14/12/2007
Messages : 1 401
Mythbox

Re : [MythTV+VDR-DVBs] Gentoo - Intégrer MythTV + VDR, Help!

Ok, tu as trouvé un fichier lircrc mais celui-ci doit aussi correspondre au fichier /etc/lirc/lircd.conf donc montre-nous ce qu'il y a dans /etc/lirc/lircd.conf ...

Hors ligne

#15 23/01/2008 20:18:17

diablo1
Invité

Re : [MythTV+VDR-DVBs] Gentoo - Intégrer MythTV + VDR, Help!

Salut piratebab,

En fait je tourne avec une skystar2 DVB-S, avec le logiciel VDR, qui fonctionne en mode client/serveur.
Je souhaite profiter de mon abonnement donc je souhaite pouvoir utiliser un module CAM; d'où l'idée de me servir de VDR comme backend, mais l'info est difficile a trouver.

VDR fonctionne du tonnère, mais l'environnement OSD n'est pas tres attrayant, d'ou l'idée de fusionner avec MythTV.
L'objectif premier faire fonctionner ma carte en Free2Air puis avec le support CAM(ControlAccessModule).

Je ne peux te conseiller que http://vdr.bluox.org/ et http://jaypeche.free.fr/; tu y trouveras ton bonheur, je pense...

#16 23/01/2008 20:21:10

diablo1
Invité

Re : [MythTV+VDR-DVBs] Gentoo - Intégrer MythTV + VDR, Help!

#
# this config file was automatically generated
# using	lirc-0.7.1pre2(any) on Mon Jul	4 22:11:52 2005
#
# contributed by
#
# brand:		       Technisat
# model	no. of remote control: TTS35AI
# devices being	controlled by this remote: Skystar 2.6D
#

begin remote

  name	Technisat_TTS35AI.conf
  bits		 13
  flags	RC5|CONST_LENGTH
  eps		 30
  aeps		100

  one		882   803
  zero		882   803
  plead		905
  gap	       112766
  toggle_bit	  2


      begin codes
	  Power			   0x1A8C
	  Mute			   0x1A8D
	  1			   0x1281
	  2			   0x1A82
	  3			   0x1283
	  4			   0x1A84
	  5			   0x1285
	  6			   0x1A86
	  7			   0x1287
	  8			   0x1A88
	  9			   0x1289
	  0			   0x1A80
	  -/--			   0x128A
	  A/B			   0x1AA3
	  Red			   0x0AAB
	  Green			   0x02AC
	  Yellow		   0x0AAD
	  Blue			   0x02AE
	  OK			   0x0A97
	  Up			   0x12A0
	  Down			   0x1AA1
	  Left			   0x1291
	  Right			   0x1A90
	  SFI			   0x12AF
	  Exit			   0x1AA2
	  INFO			   0x028F
#	   Prog+		    0x1AA0
#	   Prog-		    0x12A1
	  TV/Radio		   0x0293
#	   Volume+		    0x1A90
#	   Volume-		    0x1291
	  Menu			   0x0A92
	  Hilfe			   0x1A8F
	  TXT			   0x12BC
	  STOP			   0x1AA9
	  EXT			   0x12B8
	  HILFE2		   0x0AB6
      end codes

end remote

Telecommande technisat sur port COM1

#17 23/01/2008 21:13:42

morphinux
Expert MythTV
Inscription : 14/12/2007
Messages : 1 401
Mythbox

Re : [MythTV+VDR-DVBs] Gentoo - Intégrer MythTV + VDR, Help!

ok, maintenant tu compares le nom donné au code avec le nom donné au "button" du fichier lircrc.

exemple :

dans le fichier lircrc que tu nous a transmis on trouve pour le volume :

begin
  prog = mythtv
  button = VolumeUp
  repeat = 3
  config = F11  
end

begin
  prog = mythtv
  button = VolumeDown
  repeat = 3
  config = F10  
end

alors qu'il faudrait mettre :

begin
  prog = mythtv
  button = Volume+
  repeat = 3
  config = F11  
end

begin
  prog = mythtv
  button = Volume-
  repeat = 3
  config = F10  
end

donc dans ton fichier lircrc, tu dois modifier quelques "button" pour que ça fonctionne en relation avec /etc/lirc/lircd.conf.
Par exemple, la touche "green" correspond à quoi sur ta télécommande, idem pour "yellow" , "blue" etc.

Au fait, est-ce que ta télécommande réagit quand tu est en console.

Mets-toi en root en console et fais

#irw

puis tape sur les touches de ta télécommande et regarde si ça réagit et copie le resultat.

Une fois que tout semble ok, tu mets ton fichier lircrc dans /home/"user"/.mythtv/ puis tu relances lirc :

/etc/init.d/lirc restart

puis tu relances mythtv-setup en root. Si tu as toujours les mêmes messages d'erreur concernant lircrc alors tu lances mythtv-setup en "user" ....

Dernière modification par morphinux (23/01/2008 21:15:01)

Hors ligne

#18 23/01/2008 21:14:14

piratebab
Co-fondateur de MythTV-fr
Lieu : Sud Ouest
Inscription : 30/11/2007
Messages : 4 064
Mythbox

Re : [MythTV+VDR-DVBs] Gentoo - Intégrer MythTV + VDR, Help!

merci, je regarde ça.
Mais sauf erreur de ma part, si ton module CAM fonctionne sous linux avec VDR, il devrait fonctionner aussi avec mythtv directement.
Ce que tu veux faire me semble bien compliqué!

tu peux coller la ligne lspci correspondant à ta carte ?

édit:
Je viens de voir sur la liste des devs mythtv un gars qui à le même problème que toi (DVB-S et canaux criptés) , mais personne n'a répondu.
Est ce que ça marche avec xine chez toi ,


Mythuser depuis 2005

Hors ligne

#19 23/01/2008 22:03:48

diablo1
Invité

Re : [MythTV+VDR-DVBs] Gentoo - Intégrer MythTV + VDR, Help!

Je souhaite faire cohabiter vdr et mythtv pour créer un environnement convivial qui n'existe pas sous vdr, je dévellope dbox2 sous gentoo, et je souhaite l'integrer a mythtv ! Cela devrait permettre de compiler un HTPC complet avec le support CAM. Tu peux trouver ci-dessus les infos que tu souhaites !

#20 23/01/2008 22:07:27

diablo1
Invité

Re : [MythTV+VDR-DVBs] Gentoo - Intégrer MythTV + VDR, Help!

Pour morphunix, je te remercie pour ces précisons, j'avais + ou - pigé grace a ton post. IRW en console me retourne les infos ki vont bien tout comme chez toi. Il me reste a faire avancer le truc... je te tiens au courant. Merçi pour ta courtoisie !

#21 24/01/2008 15:59:17

dalgwen
Expert MythTV
Inscription : 16/12/2007
Messages : 617
Mythbox

Re : [MythTV+VDR-DVBs] Gentoo - Intégrer MythTV + VDR, Help!

Si jamais mythtv ne peut gérer les flux cryptés et les cartes de décryptage, voici une piste pour essayer de feinter (Je n'ai pas essayé, mais c'est peut être possible) :
- VDR dispose d'un plug in de streaming.
- Mythtv dispose d'une carte d'acquisition "virtuelle" pour les flux IP. En se battant avec des scripts, il est peut être possible de commander le changement de chaines de VDR (c'est en tout cas possible coté mythtv, pour VDR je ne sais pas)

Donc il est peut être possible de connecter vdr et mythtv ensemble par ce biais.
J'avais fait un petit tuto qui utilisait VLC comme source externe pour mythtv.
http://mythtv-fr.tuxfamily.org/wiki/freebox_et_vlc
Peut être qu'il peut être adapaté pour VDR.

Bonne chance et tiens nous au courant.


Disclaimer : J'ai migré sur tvheadend mais je passe encore ici de temps en temps (bouuhhh le traître)

Hors ligne

#22 24/01/2008 16:58:35

diablo1
Invité

Re : [MythTV+VDR-DVBs] Gentoo - Intégrer MythTV + VDR, Help!

Slt Dalgwen,

Je suis novice sous mythtv, et j'avoue patauger un peu... Tu as raison VDR fonctionne comme serveur stream d'où l'idée de récuperer le flux dans mythtv, pour profiter des bouquets payants !

Solution 1 : Utiliser VDR comme Backend et MythTV comme frontend, sachant que VDR en stream marche très bien chez moi(serveur VDR/client Xine). J'ai fais quelques essais en vain .. Fallait pas réver !

Solution 2 : Le support Dbox2, il permet de récupérer le flux d'un démodulateur DreamBox via Ethernet, ce qui me semble être la meilleure solution, compte tenu que VDR et DreamBox sont très proches. Il faut voir pour la compatibilité du stream.. Pas encore réussi ! Mon Backend est planté !

jay@dragoon ~ $ mythfrontend
2008-01-24 16:42:22.817 Using runtime prefix = /usr
2008-01-24 16:42:22.827 DPMS is active.
2008-01-24 16:42:22.875 New DB connection, total: 1
2008-01-24 16:42:22.895 Connected to database 'mythconverg' at host: localhost
2008-01-24 16:42:22.898 Total desktop dim: 1024x768, with 1 screen[s].
2008-01-24 16:42:22.904 Using screen 0, 1024x768 at 0,0
2008-01-24 16:42:22.934 Current Schema Version: 1160
2008-01-24 16:42:22.948 mythfrontend version: 0.20.20070821-1 www.mythtv.org
2008-01-24 16:42:22.948 Enabled verbose msgs:  important general
2008-01-24 16:42:23.293 Total desktop dim: 1024x768, with 1 screen[s].
2008-01-24 16:42:23.298 Using screen 0, 1024x768 at 0,0
2008-01-24 16:42:23.299 Switching to square mode (G.A.N.T.)
2008-01-24 16:42:23.334 Using the Qt painter
mythtv: unknown token "[...]" in /home/jay/.mythtv/lircrc:19 ignored
2008-01-24 16:42:24.400 Loading from: /usr/share/mythtv/themes/G.A.N.T./base.xml
2008-01-24 16:42:24.425 Loading from: /usr/share/mythtv/themes/default/base.xml
2008-01-24 16:42:24.556 Registering Internal as a media playback plugin.
2008-01-24 16:42:24.592 Registering MythDVD DVD Media Handler as a media handler ext()
2008-01-24 16:42:24.595 Registering MythDVD VCD Media Handler as a media handler ext()
2008-01-24 16:42:24.651 Registering MythGallery Media Handler 1/2 as a media handler ext()
2008-01-24 16:42:24.652 Registering MythGallery Media Handler 2/2 as a media handler ext(gif,jpg,png)
2008-01-24 16:42:24.800 Registering MythMusic Media Handler 1/2 as a media handler ext()
2008-01-24 16:42:24.802 Registering MythMusic Media Handler 2/2 as a media handler ext(ogg,mp3,aac,flac)
2008-01-24 16:42:30.020 New DB connection, total: 2
2008-01-24 16:42:30.021 Connected to database 'mythconverg' at host: localhost
2008-01-24 16:42:30.078 Connecting to backend server: 127.0.0.1:6543 (try 1 of 5)
2008-01-24 16:42:30.084 Connection timed out.          
                        You probably should modify the Master Server 
                        settings in the setup program and set the    
                        proper IP address.
2008-01-24 16:42:36.679 TV: Attempting to change from None to None
2008-01-24 16:42:38.630 Connecting to backend server: 127.0.0.1:6543 (try 1 of 5)
2008-01-24 16:42:38.630 Connection timed out.          
                        You probably should modify the Master Server 
                        settings in the setup program and set the    
                        proper IP address.
2008-01-24 16:42:39.291 TV: Attempting to change from None to None
2008-01-24 16:43:18.275 Connecting to backend server: 127.0.0.1:6543 (try 1 of 5)
2008-01-24 16:43:18.275 Connection timed out.          
                        You probably should modify the Master Server 
                        settings in the setup program and set the    
                        proper IP address.
2008-01-24 16:43:23.284 Connecting to backend server: 127.0.0.1:6543 (try 1 of 5)
2008-01-24 16:43:23.284 Connection timed out.          
                        You probably should modify the Master Server 
                        settings in the setup program and set the    
                        proper IP address.
2008-01-24 16:43:23.799 Error rescheduling id 0 in ScheduledRecording::signalChange
2008-01-24 16:43:29.982 Connecting to backend server: 127.0.0.1:6543 (try 1 of 5)
2008-01-24 16:43:29.982 Connection timed out.          
                        You probably should modify the Master Server 
                        settings in the setup program and set the    
                        proper IP address.

Solution 3 : Quelques choses qui ressemblerait à ce que tu proposes, le plugin Stream pour VDR (Bien qu'il ne soit pas indispensable, VDR fonctionne sur ce mode), par contre le flux serait peut être plus acceptable pour MythTV. De son côté le support IPTV.

Etant donné que je patauge un epu avec mythtv pour le moment, je suis a l'écoute de vos conseils...

#23 24/01/2008 17:17:10

morphinux
Expert MythTV
Inscription : 14/12/2007
Messages : 1 401
Mythbox

Re : [MythTV+VDR-DVBs] Gentoo - Intégrer MythTV + VDR, Help!

as-tu réussi à récupérer le flux de la freebox comme tu le souhaitais plus haut ???

Hors ligne

#24 24/01/2008 17:29:04

morphinux
Expert MythTV
Inscription : 14/12/2007
Messages : 1 401
Mythbox

Re : [MythTV+VDR-DVBs] Gentoo - Intégrer MythTV + VDR, Help!

mythtv: unknown token "[...]" in /home/jay/.mythtv/lircrc:19 ignored

ton fichier lircrc n'est toujours pas dans /home/jay/.mythtv/


2008-01-24 16:42:30.021 Connected to database 'mythconverg' at host: localhost
2008-01-24 16:42:30.078 Connecting to backend server: 127.0.0.1:6543 (try 1 of 5)
2008-01-24 16:42:30.084 Connection timed out.          
                        You probably should modify the Master Server 
                        settings in the setup program and set the    
                        proper IP address.
2008-01-24 16:42:36.679 TV: Attempting to change from None to None
2008-01-24 16:42:38.630 Connecting to backend server: 127.0.0.1:6543 (try 1 of 5)
2008-01-24 16:42:38.630 Connection timed out.          
                        You probably should modify the Master Server 
                        settings in the setup program and set the    
                        proper IP address.
2008-01-24 16:42:39.291 TV: Attempting to change from None to None
2008-01-24 16:43:18.275 Connecting to backend server: 127.0.0.1:6543 (try 1 of 5)
2008-01-24 16:43:18.275 Connection timed out.          
                        You probably should modify the Master Server 
                        settings in the setup program and set the    
                        proper IP address.

tu as très certainement un problème de droit d'accès. Avec quel utilisateur démarres-tu mythfrontend, mythtv ou jay ?? sinon l'ajout de l'IP du backend devrait pouvoir régler le problème ...

Dernière modification par morphinux (24/01/2008 17:34:04)

Hors ligne

#25 24/01/2008 17:30:20

diablo1
Invité

Re : [MythTV+VDR-DVBs] Gentoo - Intégrer MythTV + VDR, Help!

Slt Morphinux !

Non je n'ai pas réussi bien que j'ai compilé myth avec le support freebox. De plus en cherchant à utiliser vdr comme backend, et bien myth est planté. Je l'ai pourtant recompiler, reconfigurer comme d'origine, relancer le demon,  mais cela ne marche pas, cf logs plus haut !
En tout cas ton aide m'a permis d'avancer un peu, grace a lircrc, telecommande nickel ..
As-tu testé le support Freebox? ca fonctionne bien ?

Il me reste donc à réparer le backend, essayer le support freebox ds un premier tps.
Puis m'armer de courage pour tenter de récuperer les chaines sat ki vont bien !

Réponse rapide

Veuillez composer votre message et l'envoyer
Si vous êtes un être humain ne changez pas le contenu de ces deux champs.

Pied de page des forums

Propulsé par FluxBB

Webmasteur SnouF

Hébergé par Tuxfamily

Valid XHTML 1.0 Strict